How to Delete a Google My Business Listing – A Common Question with a Complex Answer

Posted by MiriamEllis

“How do I delete a Google listing?” is an FAQ on local SEO forums — and it represents an oversimplification of a complicated and multifaceted issue. The truth is, simple deletion is seldom the answer. Rather, most events that arise in the course of doing business require knowing which steps to take to properly manage GMB listings so that they’re helping your business instead of harming it.

When it comes to managing unwanted or problematic Google My Business listings, it’s a case of horses for courses. There isn’t a single set of instructions you can reliably follow, because your particular scenario defines which steps you should take. The following table should help you identify common situations and choose the one that most closely matches yours. From there, you’ll learn which actions are available to you, and which ones, unfortunately, can’t be accomplished.

Because management of problem GMB listings usually requires either being in control of them or unverifying them, our chart begins with three verification scenarios, and then moves on to cover other typical business events.

Scenario

Context

Steps

Notes

Unverify a Verified Listing You Control

You have a listing in your GMB dashboard that you no longer wish to control.

  • Log into your GMB dashboard
  • Click “edit”
  • Click the “info” tab
  • Click “remove listing”
  • Check all the checkboxes
  • Click “delete account”

No worries: The last step does NOT delete your Google account or the listing, itself. It simply un-verifies it so that you are no longer controlling it. The listing will still exist and someone else can take control of it.

Verify an Unverified Listing to Gain Control

You need to take control of an unwanted listing. You can tell it’s not verified, because it’s marked “claim this business” in Google Maps or “own this business?” in the knowledge panel.

Once you’ve verified the listing, you can take next steps to manage it if it’s problematic.

Take Control of a Listing Someone Else Verified

You need to take control of an unwanted listing, but someone else has verified it. You can tell it’s verified, because it lacks the attributes of “claim this business” in Google Maps or “own this business?” in the knowledge panel.

  • Contact Google via these steps
  • Google will contact the owner
  • If Google doesn’t hear back from the owner in one week, you can verify the listing

There are some anecdotal accounts of owners being able to prove to Google their rights to control a listing based on their control of an email address that matches the website domain, but no guarantees. You may need to seek legal counsel to mediate resolution with a third party who refuses to relinquish control of the listing.

Manage a Duplicate Listing for a Brick-and-Mortar Business

Your business serves customers at your location (think a retail shop, restaurant, law practice). You find more than one listing representing the business, either at its present location, at an incorrect location, or at a previous location.

  • If the address exactly matches the correct, current address of the business, contact Google to request that they merge the two listings into one.
  • If the address contains an error and the business never existed there, use the “suggest an edit” link on Google Maps, toggle the yes/no switch to “yes,” and choose the “never existed” radio button.
  • If the address is one the business previously occupied, see the section in this table on business moves.

If reviews have become associated with a business address that contains an error, you can try to request that the reviews be transferred PRIOR to designating that the business “never existed” in Google Maps.

Manage a Duplicate Listing for a Service Area Business (SAB)

Your business serves customers at their locations (think a plumber, landscaper, or cleaning service). You find more than one listing representing the business.

  • Once you’ve verified the duplicate listing, contact Google to request that they merge the two listings into one.

Remember that Google’s guidelines require that you keep addresses for SAB listings hidden.

Manage an Unwanted Listing for a Multi-Practitioner Business

The business has multiple partners (think a legal firm or medical office). You discover multiple listings for a specific partner, or for partners who no longer work there, or for partner who are deceased.

  • Unfortunately, Google will not remove multi-practitioner listings for partners who are presently employed by the business.
  • If the partner no longer works there, read this article about the dangers of ignoring these listings. Then, contact Google to request that they designate the listing as “moved” (like when a business moves) to the address of the practice — not to the partner’s new address. *See notes.
  • If, regrettably, a partner has passed away, contact Google to show them an obituary.

In the second scenario, Google can only mark a past partner’s listing as moved if the listing is unverified. If the listing is verified, it would be ideal if the old partner would unverify it for you, but, if they are unwilling to do so, at least try to persuade them to update the listing with the details of their new location as a last resort. Unfortunately, this second option is far from ideal.

On a separate note, if the unwanted listing pertains to a solo-practitioner business (there’s a listing for both the company and for a single practitioner who operates the company), you can contact Google to ask that they merge the two listings in an effort to combine the ranking power of the two listings, if desired.

Manage a Listing When a Business Moves

Your company is moving to a new location. You want to avoid having the listing marked as “permanently closed,” sending a wrong signal to consumers that you’ve gone out of business.

  • Update your website with your new contact information and driving directions
  • Update your existing GMB listing in the Google My Business dashboard. Don’t create a new listing!
  • Update your other local business listings to reflect your new info. A product like Moz Local can greatly simplify this big task.

Be sure to use your social platforms to advertise your move.

Be sure to be on the lookout for any new duplicate listings that may arise as a result of a move. Again, Moz Local will be helpful for this.

Google will generally automatically move your reviews from your old location to your new one, but read this to understand exceptions.

Manage a Listing Marked “Permanently Closed”

A listing of yours has ended up marked as “permanently closed,” signaling to consumers that you may have gone out of business. Permanently closed listings are also believed to negatively impact the rankings of your open business.

  • If the “permanently closed” label exists on a verified listing for a previous location the business occupied, unverify the listing. Then contact Google to ask them to mark it as moved to the new location. This should rectify the “permanently closed” problem.
  • If the permanently closed listing exists on a listing for your business that someone else as verified (i.e., you don’t control the listing), please see the above section labeled “Take Control of a Listing Someone Else Verified.” If you can get control of it in your dashboard and then unverify it, you’ll then be able to contact Google to ask them to mark it as moved.

The “permanently closed” label can also appear on listings for practitioners who have left the business. See the section of this chart labeled “Manage an Unwanted Listing for a Multi-Practitioner Business.”

Manage a Merger/Acquisition

Many nuances to this scenario may dictate specific steps. If the merger/acquisition includes all of the previous physical locations remaining open to the public under the new name, just edit the details of the existing GMB listings to display that new name. But, if the locations that have been acquired close down, move onto the next steps.

  • Don’t edit the details of the old locations to reflect the new name
  • Unverify the listings for the old locations
  • Finally, contact Google to ask them to mark all the old locations listings as moved to the new location.

Mergers and acquisitions are complex and you may want to hire a consultant to help you manage this major business event digitally. You may also find the workload significantly lightened by using a product like Moz Local to manage the overhaul of core citations for all the businesses involved in the event.

Manage a Spam Listing

You realize a competitor or other business is violating Google’s guidelines, as in the case of creating listings at fake locations. You want to clean up the results to improve their relevance to the local community.

  • Find the listing in Google Maps
  • Click the “suggest an edit” link
  • Toggle the yes/no toggle to “yes”
  • Choose the radio button for “spam”
  • Google will typically email you if/when your edit is accepted

Google doesn’t always act on spam. If you follow the outlined steps and don’t get anywhere with them, you may want to post the spam example in the GMB forum in hopes that a Top Contributor there might escalate the issue.

Unfortunately, spam is very common. Don’t be surprised if a spammer who gets caught comes right back on and continues to spam.

Manage a Listing with Bad Reviews

Your company is embarrassed by the negative reviews that are attached to its GMB listing. You wish you could just make the whole thing disappear.

  • If the reviews violate Google’s policy, consider these steps for taking action. Be advised that Google may not remove them, regardless of clear violations.
  • If the reviews are negative but genuine, Google will not remove them. Remedy the problems, in-house, that consumers are citing and master responding to reviews in a way that can save customers and your business.
  • If the business is unable to remedy structural problems being cited in reviews, the company may lack the necessary components for success.

Short of completely rebranding and moving your business to a new location, your business must be prepared to manage negative reviews. Unless consumers are citing illegal behaviors (in which case, you need legal counsel rather than marketing), negative reviews should be viewed as a FREE blueprint for fixing the issues that customers are citing.

Bear in mind that many unhappy customers won’t take the time to complain. They’ll just go away in silence and never return to your business again. When a customer takes the time to voice a complaint, seize this as a golden opportunity to win him back and to improve your business for all future customers.

Whew! Eleven common Google My Business listing management scenarios, each requiring its own set of steps. It’s my hope that this chart will not only help explain why few cases really come down to deleting GMB listings, and also, that it will serve as a handy reference for you when particular situations arise in your workday.

Helpful links

  1. If you’re not sure if you have problem listings, do a free lookup with the Moz Check Listing tool.
  2. If you’re a Moz Pro member, you have access to our Q&A forum. Please feel free to ask our community questions if you’re unsure about whether a GMB listing is problematic.
  3. The Google My Business Forum can be a good bet for getting advice from volunteer Top Contributors (and sometimes Google staffers) about problem GMB listings. Be prepared to share all of the details of your scenario if you post there.
  4. If you find yourself dealing with difficult Google My Business listing issues on a regular basis, I recommend reading the work of Joy Hawkins, who is one of the best technical local SEOs in the industry.
  5. Sometimes, the only thing you can do is to contact Google directly to try to get help with a tricky problem. Here is their main Contact page. If you’re a Google Adwords customer, you can phone 1-866-2Google and select the option for Google My Business support. Another way to seek help (and this is sometimes the fastest route) is to tweet to Google’s GMB Twitter account. Be advised that not every Google rep has had the benefits of complete training. Some interactions may be more satisfactory than others. And, if you are a digital marketer, do be prepared to set correct client expectations that not all problems can be resolved. Sometimes, even your best efforts may not yield the desired results, due to the limitations of Google’s local product.

Why it’s worth the effort to work to resolve problematic Google listings

Cumulatively speaking, inaccurate and duplicative listings can misinform and misdirect consumers while also sapping your ranking strength. Local business listings are a form of customer service, and when this element of your overall marketing plan is neglected, it can lead to significant loss of traffic and revenue. It can also negatively impact reputation in the form of negative reviews citing wrong online driving directions or scenarios in which customers end up at the old location of a business that has moved.

Taken altogether, these unwanted outcomes speak to the need for an active location data management strategy that monitors all business listings for problems and takes appropriate actions to remedy them. Verifying listings and managing duplicates isn’t glamorous work, but when you consider what’s at stake for the business, it’s not only necessary work, but even heroic. So, skill up and be prepared to tackle the thorniest situations. The successes can be truly rewarding!

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 3 weeks ago from tracking.feedpress.it

Darryl, the man behind dotmailer’s Custom Technical Solutions team

Why did you decide to come to dotmailer?

I first got to know dotmailer when the company was just a bunch of young enthusiastic web developers called Ellipsis Media back in 1999. I was introduced by one of my suppliers and we decided to bring them on board to build a recruitment website for one of our clients. That client was Amnesty International and the job role was Secretary General. Not bad for a Croydon company whose biggest client before that was Scobles the plumber’s merchants. So, I was probably dotmailer’s first ever corporate client! After that, I used dotmailer at each company I worked for and then one day they approached a colleague and me and asked us if we wanted to work for them. That was 2013.  We grabbed the opportunity with both hands and haven’t looked back since.

Tell us a bit about your role

I’m the Global Head of Technical Solutions which actually gives me responsibility for 2 teams. First, Custom Technical Solutions (CTS), who build bespoke applications and tools for customers that allow them to integrate more closely with dotmailer and make life easier. Second, Technical Pre-sales, which spans our 3 territories (EMEA, US and APAC) and works with prospective and existing clients to figure out the best solution and fit within dotmailer.

What accomplishments are you most proud of from your dotmailer time so far?

I would say so far it has to be helping to turn the CTS team from just 2 people into a group of 7 highly skilled and dedicated men and women who have become an intrinsic and valued part of the dotmailer organization. Also I really enjoy being part of the Senior Technical Management team. Here we have the ability to influence the direction and structure of the platform on a daily basis.

Meet Darryl Clark – the cheese and peanut butter sandwich lover

Can you speak a bit about your background and that of your team? What experience and expertise is required to join this team?

My background is quite diverse from a stint in the Army, through design college, web development, business analysis to heading up my current teams. I would say the most valuable skill that I have is being highly analytical. I love nothing more than listening to a client’s requirements and digging deep to work out how we can answer these if not exceed them.

As a team, we love nothing more than brainstorming our ideas. Every member has a valid input and we listen. Everyone has the opportunity to influence what we do and our motto is “there is no such thing as a stupid question.”

To work in my teams you have to be analytical but open minded to the fact that other people may have a better answer than you. Embrace other people’s input and use it to give our clients the best possible solution. We are hugely detail conscious, but have to be acutely aware that we need to tailor what we say to our audience so being able to talk to anyone at any level is hugely valuable.

How much of the dotmailer platform is easily customizable and when does it cross over into something that requires your team’s expertise? How much time is spent on these custom solutions one-time or ongoing?

I’ll let you in on a little secret here. We don’t actually do anything that our customers can’t do with dotmailer given the right knowledge and resources. This is because we build all of our solutions using the dotmailer public API. The API has hundreds of methods in both SOAP and REST versions, which allows you to do a huge amount with the dotmailer platform. We do have a vast amount of experience and knowledge in the team so we may well be able to build a solution quicker than our customers. We are more than happy to help them and their development teams build a solution using us on a consultancy basis to lessen the steepness of the learning curve.

Our aim when building a solution for a customer is that it runs silently in the background and does what it should without any fuss.

What are your plans for the Custom Tech Solutions team going forward?

The great thing about Custom Technical Solutions is you never know what is around the corner as our customers have very diverse needs. What we are concentrating on at the moment is refining our processes to ensure that they are as streamlined as possible and allow us to give as much information to the customer as we can. We are also always looking at the technology and coding approaches that we use to make sure that we build the most innovative and robust solutions.

We are also looking at our external marketing and sharing our knowledge through blogs so keep an eye on the website for our insights.

What are the most common questions that you get when speaking to a prospective customer?

Most questions seem to revolve around reassurance such as “Have you done this before?”, “How safe is my data?”, “What about security?”, “Can you talk to my developers?”, “Do I need to do anything?”.  In most instances, we are the ones asking the questions as we need to find out information as soon as possible so that we can analyse it to ensure that we have the right detail to provide the right solution.

Can you tell us about the dotmailer differentiators you highlight when speaking to prospective customers that seem to really resonate?

We talk a lot about working with best of breed so for example a customer can use our Channel Extensions in automation programs to fire out an SMS to a contact using their existing provider. We don’t force customers down one route, we like to let them decide for themselves.

Also, I really like to emphasize the fact that there is always more than one way to do something within the dotmailer platform. This means we can usually find a way to do something that works for a client within the platform. If not, then we call in CTS to work out if there is a way that we can build something that will — whether this is automating uploads for a small client or mass sending from thousands of child accounts for an enterprise level one.

What do you see as the future of marketing automation technology?  Will one size ever fit all? Or more customization going forward?

The 64 million dollar question. One size will never fit all. Companies and their systems are too organic for that. There isn’t one car that suits every driver or one racquet that suits every sport. Working with a top drawer partner network and building our system to be as open as possible from an integration perspective means that our customers can make dotmailer mold to their business and not the other way round…and adding to that the fact that we are building lots of features in the platform that will blow your socks off.

Tell us a bit about yourself – favorite sports team, favorite food, guilty pleasure, favorite band, favorite vacation spot?

I’m a dyed in the wool Gooner (aka Arsenal Football Club fan) thanks to my Grandfather leading me down the right path as a child. If you are still reading this after that bombshell, then food-wise I pretty much like everything apart from coriander which as far as I’m concerned is the Devils own spawn. I don’t really have a favorite band, but am partial to a bit of Level 42 and Kings of Leon and you will also find me listening to 90s drum and bass and proper old school hip hop. My favorite holiday destination is any decent villa that I can relax in and spend time with my family and I went to Paris recently and loved that. Guilty pleasure – well that probably has to be confessing to liking Coldplay or the fact that my favorite sandwich is peanut butter, cheese and salad cream. Go on try it, you’ll love it.

Want to meet more of the dotmailer team? Say hi to Darren Hockley, Global Head of Support, and Dan Morris, EVP for North America.

Reblogged 10 months ago from blog.dotmailer.com

Stop Ghost Spam in Google Analytics with One Filter

Posted by CarloSeo

The spam in Google Analytics (GA) is becoming a serious issue. Due to a deluge of referral spam from social buttons, adult sites, and many, many other sources, people are starting to become overwhelmed by all the filters they are setting up to manage the useless data they are receiving.

The good news is, there is no need to panic. In this post, I’m going to focus on the most common mistakes people make when fighting spam in GA, and explain an efficient way to prevent it.

But first, let’s make sure we understand how spam works. A couple of months ago, Jared Gardner wrote an excellent article explaining what referral spam is, including its intended purpose. He also pointed out some great examples of referral spam.

Types of spam

The spam in Google Analytics can be categorized by two types: ghosts and crawlers.

Ghosts

The vast majority of spam is this type. They are called ghosts because they never access your site. It is important to keep this in mind, as it’s key to creating a more efficient solution for managing spam.

As unusual as it sounds, this type of spam doesn’t have any interaction with your site at all. You may wonder how that is possible since one of the main purposes of GA is to track visits to our sites.

They do it by using the Measurement Protocol, which allows people to send data directly to Google Analytics’ servers. Using this method, and probably randomly generated tracking codes (UA-XXXXX-1) as well, the spammers leave a “visit” with fake data, without even knowing who they are hitting.

Crawlers

This type of spam, the opposite to ghost spam, does access your site. As the name implies, these spam bots crawl your pages, ignoring rules like those found in robots.txt that are supposed to stop them from reading your site. When they exit your site, they leave a record on your reports that appears similar to a legitimate visit.

Crawlers are harder to identify because they know their targets and use real data. But it is also true that new ones seldom appear. So if you detect a referral in your analytics that looks suspicious, researching it on Google or checking it against this list might help you answer the question of whether or not it is spammy.

Most common mistakes made when dealing with spam in GA

I’ve been following this issue closely for the last few months. According to the comments people have made on my articles and conversations I’ve found in discussion forums, there are primarily three mistakes people make when dealing with spam in Google Analytics.

Mistake #1. Blocking ghost spam from the .htaccess file

One of the biggest mistakes people make is trying to block Ghost Spam from the .htaccess file.

For those who are not familiar with this file, one of its main functions is to allow/block access to your site. Now we know that ghosts never reach your site, so adding them here won’t have any effect and will only add useless lines to your .htaccess file.

Ghost spam usually shows up for a few days and then disappears. As a result, sometimes people think that they successfully blocked it from here when really it’s just a coincidence of timing.

Then when the spammers later return, they get worried because the solution is not working anymore, and they think the spammer somehow bypassed the barriers they set up.

The truth is, the .htaccess file can only effectively block crawlers such as buttons-for-website.com and a few others since these access your site. Most of the spam can’t be blocked using this method, so there is no other option than using filters to exclude them.

Mistake #2. Using the referral exclusion list to stop spam

Another error is trying to use the referral exclusion list to stop the spam. The name may confuse you, but this list is not intended to exclude referrals in the way we want to for the spam. It has other purposes.

For example, when a customer buys something, sometimes they get redirected to a third-party page for payment. After making a payment, they’re redirected back to you website, and GA records that as a new referral. It is appropriate to use referral exclusion list to prevent this from happening.

If you try to use the referral exclusion list to manage spam, however, the referral part will be stripped since there is no preexisting record. As a result, a direct visit will be recorded, and you will have a bigger problem than the one you started with since. You will still have spam, and direct visits are harder to track.

Mistake #3. Worrying that bounce rate changes will affect rankings

When people see that the bounce rate changes drastically because of the spam, they start worrying about the impact that it will have on their rankings in the SERPs.

bounce.png

This is another mistake commonly made. With or without spam, Google doesn’t take into consideration Google Analytics metrics as a ranking factor. Here is an explanation about this from Matt Cutts, the former head of Google’s web spam team.

And if you think about it, Cutts’ explanation makes sense; because although many people have GA, not everyone uses it.

Assuming your site has been hacked

Another common concern when people see strange landing pages coming from spam on their reports is that they have been hacked.

landing page

The page that the spam shows on the reports doesn’t exist, and if you try to open it, you will get a 404 page. Your site hasn’t been compromised.

But you have to make sure the page doesn’t exist. Because there are cases (not spam) where some sites have a security breach and get injected with pages full of bad keywords to defame the website.

What should you worry about?

Now that we’ve discarded security issues and their effects on rankings, the only thing left to worry about is your data. The fake trail that the spam leaves behind pollutes your reports.

It might have greater or lesser impact depending on your site traffic, but everyone is susceptible to the spam.

Small and midsize sites are the most easily impacted – not only because a big part of their traffic can be spam, but also because usually these sites are self-managed and sometimes don’t have the support of an analyst or a webmaster.

Big sites with a lot of traffic can also be impacted by spam, and although the impact can be insignificant, invalid traffic means inaccurate reports no matter the size of the website. As an analyst, you should be able to explain what’s going on in even in the most granular reports.

You only need one filter to deal with ghost spam

Usually it is recommended to add the referral to an exclusion filter after it is spotted. Although this is useful for a quick action against the spam, it has three big disadvantages.

  • Making filters every week for every new spam detected is tedious and time-consuming, especially if you manage many sites. Plus, by the time you apply the filter, and it starts working, you already have some affected data.
  • Some of the spammers use direct visits along with the referrals.
  • These direct hits won’t be stopped by the filter so even if you are excluding the referral you will sill be receiving invalid traffic, which explains why some people have seen an unusual spike in direct traffic.

Luckily, there is a good way to prevent all these problems. Most of the spam (ghost) works by hitting GA’s random tracking-IDs, meaning the offender doesn’t really know who is the target, and for that reason either the hostname is not set or it uses a fake one. (See report below)

Ghost-Spam.png

You can see that they use some weird names or don’t even bother to set one. Although there are some known names in the list, these can be easily added by the spammer.

On the other hand, valid traffic will always use a real hostname. In most of the cases, this will be the domain. But it also can also result from paid services, translation services, or any other place where you’ve inserted GA tracking code.

Valid-Referral.png

Based on this, we can make a filter that will include only hits that use real hostnames. This will automatically exclude all hits from ghost spam, whether it shows up as a referral, keyword, or pageview; or even as a direct visit.

To create this filter, you will need to find the report of hostnames. Here’s how:

  1. Go to the Reporting tab in GA
  2. Click on Audience in the lefthand panel
  3. Expand Technology and select Network
  4. At the top of the report, click on Hostname

Valid-list

You will see a list of all hostnames, including the ones that the spam uses. Make a list of all the valid hostnames you find, as follows:

  • yourmaindomain.com
  • blog.yourmaindomain.com
  • es.yourmaindomain.com
  • payingservice.com
  • translatetool.com
  • anotheruseddomain.com

For small to medium sites, this list of hostnames will likely consist of the main domain and a couple of subdomains. After you are sure you got all of them, create a regular expression similar to this one:

yourmaindomain\.com|anotheruseddomain\.com|payingservice\.com|translatetool\.com

You don’t need to put all of your subdomains in the regular expression. The main domain will match all of them. If you don’t have a view set up without filters, create one now.

Then create a Custom Filter.

Make sure you select INCLUDE, then select “Hostname” on the filter field, and copy your expression into the Filter Pattern box.

filter

You might want to verify the filter before saving to check that everything is okay. Once you’re ready, set it to save, and apply the filter to all the views you want (except the view without filters).

This single filter will get rid of future occurrences of ghost spam that use invalid hostnames, and it doesn’t require much maintenance. But it’s important that every time you add your tracking code to any service, you add it to the end of the filter.

Now you should only need to take care of the crawler spam. Since crawlers access your site, you can block them by adding these lines to the .htaccess file:

## STOP REFERRER SPAM 
RewriteCond %{HTTP_REFERER} semalt\.com [NC,OR] 
RewriteCond %{HTTP_REFERER} buttons-for-website\.com [NC] 
RewriteRule .* - [F]

It is important to note that this file is very sensitive, and misplacing a single character it it can bring down your entire site. Therefore, make sure you create a backup copy of your .htaccess file prior to editing it.

If you don’t feel comfortable messing around with your .htaccess file, you can alternatively make an expression with all the crawlers, then and add it to an exclude filter by Campaign Source.

Implement these combined solutions, and you will worry much less about spam contaminating your analytics data. This will have the added benefit of freeing up more time for you to spend actually analyze your valid data.

After stopping spam, you can also get clean reports from the historical data by using the same expressions in an Advance Segment to exclude all the spam.

Bonus resources to help you manage spam

If you still need more information to help you understand and deal with the spam on your GA reports, you can read my main article on the subject here: http://www.ohow.co/what-is-referrer-spam-how-stop-it-guide/.

Additional information on how to stop spam can be found at these URLs:

In closing, I am eager to hear your ideas on this serious issue. Please share them in the comments below.

(Editor’s Note: All images featured in this post were created by the author.)

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 1 year ago from tracking.feedpress.it

Distance from Perfect

Posted by wrttnwrd

In spite of all the advice, the strategic discussions and the conference talks, we Internet marketers are still algorithmic thinkers. That’s obvious when you think of SEO.

Even when we talk about content, we’re algorithmic thinkers. Ask yourself: How many times has a client asked you, “How much content do we need?” How often do you still hear “How unique does this page need to be?”

That’s 100% algorithmic thinking: Produce a certain amount of content, move up a certain number of spaces.

But you and I know it’s complete bullshit.

I’m not suggesting you ignore the algorithm. You should definitely chase it. Understanding a little bit about what goes on in Google’s pointy little head helps. But it’s not enough.

A tale of SEO woe that makes you go “whoa”

I have this friend.

He ranked #10 for “flibbergibbet.” He wanted to rank #1.

He compared his site to the #1 site and realized the #1 site had five hundred blog posts.

“That site has five hundred blog posts,” he said, “I must have more.”

So he hired a few writers and cranked out five thousand blogs posts that melted Microsoft Word’s grammar check. He didn’t move up in the rankings. I’m shocked.

“That guy’s spamming,” he decided, “I’ll just report him to Google and hope for the best.”

What happened? Why didn’t adding five thousand blog posts work?

It’s pretty obvious: My, uh, friend added nothing but crap content to a site that was already outranked. Bulk is no longer a ranking tactic. Google’s very aware of that tactic. Lots of smart engineers have put time into updates like Panda to compensate.

He started like this:

And ended up like this:
more posts, no rankings

Alright, yeah, I was Mr. Flood The Site With Content, way back in 2003. Don’t judge me, whippersnappers.

Reality’s never that obvious. You’re scratching and clawing to move up two spots, you’ve got an overtasked IT team pushing back on changes, and you’ve got a boss who needs to know the implications of every recommendation.

Why fix duplication if rel=canonical can address it? Fixing duplication will take more time and cost more money. It’s easier to paste in one line of code. You and I know it’s better to fix the duplication. But it’s a hard sell.

Why deal with 302 versus 404 response codes and home page redirection? The basic user experience remains the same. Again, we just know that a server should return one home page without any redirects and that it should send a ‘not found’ 404 response if a page is missing. If it’s going to take 3 developer hours to reconfigure the server, though, how do we justify it? There’s no flashing sign reading “Your site has a problem!”

Why change this thing and not that thing?

At the same time, our boss/client sees that the site above theirs has five hundred blog posts and thousands of links from sites selling correspondence MBAs. So they want five thousand blog posts and cheap links as quickly as possible.

Cue crazy music.

SEO lacks clarity

SEO is, in some ways, for the insane. It’s an absurd collection of technical tweaks, content thinking, link building and other little tactics that may or may not work. A novice gets exposed to one piece of crappy information after another, with an occasional bit of useful stuff mixed in. They create sites that repel search engines and piss off users. They get more awful advice. The cycle repeats. Every time it does, best practices get more muddled.

SEO lacks clarity. We can’t easily weigh the value of one change or tactic over another. But we can look at our changes and tactics in context. When we examine the potential of several changes or tactics before we flip the switch, we get a closer balance between algorithm-thinking and actual strategy.

Distance from perfect brings clarity to tactics and strategy

At some point you have to turn that knowledge into practice. You have to take action based on recommendations, your knowledge of SEO, and business considerations.

That’s hard when we can’t even agree on subdomains vs. subfolders.

I know subfolders work better. Sorry, couldn’t resist. Let the flaming comments commence.

To get clarity, take a deep breath and ask yourself:

“All other things being equal, will this change, tactic, or strategy move my site closer to perfect than my competitors?”

Breaking it down:

“Change, tactic, or strategy”

A change takes an existing component or policy and makes it something else. Replatforming is a massive change. Adding a new page is a smaller one. Adding ALT attributes to your images is another example. Changing the way your shopping cart works is yet another.

A tactic is a specific, executable practice. In SEO, that might be fixing broken links, optimizing ALT attributes, optimizing title tags or producing a specific piece of content.

A strategy is a broader decision that’ll cause change or drive tactics. A long-term content policy is the easiest example. Shifting away from asynchronous content and moving to server-generated content is another example.

“Perfect”

No one knows exactly what Google considers “perfect,” and “perfect” can’t really exist, but you can bet a perfect web page/site would have all of the following:

  1. Completely visible content that’s perfectly relevant to the audience and query
  2. A flawless user experience
  3. Instant load time
  4. Zero duplicate content
  5. Every page easily indexed and classified
  6. No mistakes, broken links, redirects or anything else generally yucky
  7. Zero reported problems or suggestions in each search engines’ webmaster tools, sorry, “Search Consoles”
  8. Complete authority through immaculate, organically-generated links

These 8 categories (and any of the other bazillion that probably exist) give you a way to break down “perfect” and help you focus on what’s really going to move you forward. These different areas may involve different facets of your organization.

Your IT team can work on load time and creating an error-free front- and back-end. Link building requires the time and effort of content and outreach teams.

Tactics for relevant, visible content and current best practices in UX are going to be more involved, requiring research and real study of your audience.

What you need and what resources you have are going to impact which tactics are most realistic for you.

But there’s a basic rule: If a website would make Googlebot swoon and present zero obstacles to users, it’s close to perfect.

“All other things being equal”

Assume every competing website is optimized exactly as well as yours.

Now ask: Will this [tactic, change or strategy] move you closer to perfect?

That’s the “all other things being equal” rule. And it’s an incredibly powerful rubric for evaluating potential changes before you act. Pretend you’re in a tie with your competitors. Will this one thing be the tiebreaker? Will it put you ahead? Or will it cause you to fall behind?

“Closer to perfect than my competitors”

Perfect is great, but unattainable. What you really need is to be just a little perfect-er.

Chasing perfect can be dangerous. Perfect is the enemy of the good (I love that quote. Hated Voltaire. But I love that quote). If you wait for the opportunity/resources to reach perfection, you’ll never do anything. And the only way to reduce distance from perfect is to execute.

Instead of aiming for pure perfection, aim for more perfect than your competitors. Beat them feature-by-feature, tactic-by-tactic. Implement strategy that supports long-term superiority.

Don’t slack off. But set priorities and measure your effort. If fixing server response codes will take one hour and fixing duplication will take ten, fix the response codes first. Both move you closer to perfect. Fixing response codes may not move the needle as much, but it’s a lot easier to do. Then move on to fixing duplicates.

Do the 60% that gets you a 90% improvement. Then move on to the next thing and do it again. When you’re done, get to work on that last 40%. Repeat as necessary.

Take advantage of quick wins. That gives you more time to focus on your bigger solutions.

Sites that are “fine” are pretty far from perfect

Google has lots of tweaks, tools and workarounds to help us mitigate sub-optimal sites:

  • Rel=canonical lets us guide Google past duplicate content rather than fix it
  • HTML snapshots let us reveal content that’s delivered using asynchronous content and JavaScript frameworks
  • We can use rel=next and prev to guide search bots through outrageously long pagination tunnels
  • And we can use rel=nofollow to hide spammy links and banners

Easy, right? All of these solutions may reduce distance from perfect (the search engines don’t guarantee it). But they don’t reduce it as much as fixing the problems.
Just fine does not equal fixed

The next time you set up rel=canonical, ask yourself:

“All other things being equal, will using rel=canonical to make up for duplication move my site closer to perfect than my competitors?”

Answer: Not if they’re using rel=canonical, too. You’re both using imperfect solutions that force search engines to crawl every page of your site, duplicates included. If you want to pass them on your way to perfect, you need to fix the duplicate content.

When you use Angular.js to deliver regular content pages, ask yourself:

“All other things being equal, will using HTML snapshots instead of actual, visible content move my site closer to perfect than my competitors?”

Answer: No. Just no. Not in your wildest, code-addled dreams. If I’m Google, which site will I prefer? The one that renders for me the same way it renders for users? Or the one that has to deliver two separate versions of every page?

When you spill banner ads all over your site, ask yourself…

You get the idea. Nofollow is better than follow, but banner pollution is still pretty dang far from perfect.

Mitigating SEO issues with search engine-specific tools is “fine.” But it’s far, far from perfect. If search engines are forced to choose, they’ll favor the site that just works.

Not just SEO

By the way, distance from perfect absolutely applies to other channels.

I’m focusing on SEO, but think of other Internet marketing disciplines. I hear stuff like “How fast should my site be?” (Faster than it is right now.) Or “I’ve heard you shouldn’t have any content below the fold.” (Maybe in 2001.) Or “I need background video on my home page!” (Why? Do you have a reason?) Or, my favorite: “What’s a good bounce rate?” (Zero is pretty awesome.)

And Internet marketing venues are working to measure distance from perfect. Pay-per-click marketing has the quality score: A codified financial reward applied for seeking distance from perfect in as many elements as possible of your advertising program.

Social media venues are aggressively building their own forms of graphing, scoring and ranking systems designed to separate the good from the bad.

Really, all marketing includes some measure of distance from perfect. But no channel is more influenced by it than SEO. Instead of arguing one rule at a time, ask yourself and your boss or client: Will this move us closer to perfect?

Hell, you might even please a customer or two.

One last note for all of the SEOs in the crowd. Before you start pointing out edge cases, consider this: We spend our days combing Google for embarrassing rankings issues. Every now and then, we find one, point, and start yelling “SEE! SEE!!!! THE GOOGLES MADE MISTAKES!!!!” Google’s got lots of issues. Screwing up the rankings isn’t one of them.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 1 year ago from tracking.feedpress.it

From Editorial Calendars to SEO: Setting Yourself Up to Create Fabulous Content

Posted by Isla_McKetta

Quick note: This article is meant to apply to teams of all sizes, from the sole proprietor who spends all night writing their copy (because they’re doing business during the day) to the copy team who occupies an entire floor and produces thousands of pieces of content per week. So if you run into a section that you feel requires more resources than you can devote just now, that’s okay. Bookmark it and revisit when you can, or scale the step down to a more appropriate size for your team. We believe all the information here is important, but that does not mean you have to do everything right now.

If you thought ideation was fun, get ready for content creation. Sure, we’ve all written some things before, but the creation phase of content marketing is where you get to watch that beloved idea start to take shape.

Before you start creating, though, you want to get (at least a little) organized, and an editorial calendar is the perfect first step.

Editorial calendars

Creativity and organization are not mutually exclusive. In fact, they can feed each other. A solid schedule gives you and your writers the time and space to be wild and creative. If you’re just starting out, this document may be sparse, but it’s no less important. Starting early with your editorial calendar also saves you from creating content willy-nilly and then finding out months later that no one ever finished that pesky (but crucial) “About” page.

There’s no wrong way to set up your editorial calendar, as long as it’s meeting your needs. Remember that an editorial calendar is a living document, and it will need to change as a hot topic comes up or an author drops out.

There are a lot of different types of documents that pass for editorial calendars. You get to pick the one that’s right for your team. The simplest version is a straight-up calendar with post titles written out on each day. You could even use a wall calendar and a Sharpie.

Monday Tuesday Wednesday Thursday Friday
Title
The Five Colors of Oscar Fashion 12 Fabrics We’re Watching for Fall Is Charmeuse the New Corduroy? Hot Right Now: Matching Your Handbag to Your Hatpin Tea-length and Other Fab Vocab You Need to Know
Author Ellie James Marta Laila Alex

Teams who are balancing content for different brands at agencies or other more complex content environments will want to add categories, author information, content type, social promo, and more to their calendars.

Truly complex editorial calendars are more like hybrid content creation/editorial calendars, where each of the steps to create and publish the content are indicated and someone has planned for how long all of that takes. These can be very helpful if the content you’re responsible for crosses a lot of teams and can take a long time to complete. It doesn’t matter if you’re using Excel or a Google Doc, as long as the people who need the calendar can easily access it. Gantt charts can be excellent for this. Here’s a favorite template for creating a Gantt chart in Google Docs (and they only get more sophisticated).

Complex calendars can encompass everything from ideation through writing, legal review, and publishing. You might even add content localization if your empire spans more than one continent to make sure you have the currency, date formatting, and even slang right.

Content governance

Governance outlines who is taking responsibility for your content. Who evaluates your content performance? What about freshness? Who decides to update (or kill) an older post? Who designs and optimizes workflows for your team or chooses and manages your CMS?

All these individual concerns fall into two overarching components to governance: daily maintenance and overall strategy. In the long run it helps if one person has oversight of the whole process, but the smaller steps can easily be split among many team members. Read this to take your governance to the next level.

Finding authors

The scale of your writing enterprise doesn’t have to be limited to the number of authors you have on your team. It’s also important to consider the possibility of working with freelancers and guest authors. Here’s a look at the pros and cons of outsourced versus in-house talent.

In-house authors

Guest authors and freelancers

Responsible to

You

Themselves

Paid by

You (as part of their salary)

You (on a per-piece basis)

Subject matter expertise

Broad but shallow

Deep but narrow

Capacity for extra work

As you wish

Show me the Benjamins

Turnaround time

On a dime

Varies

Communication investment

Less

More

Devoted audience

Smaller

Potentially huge

From that table, it might look like in-house authors have a lot more advantages. That’s somewhat true, but do not underestimate the value of occasionally working with a true industry expert who has name recognition and a huge following. Whichever route you take (and there are plenty of hybrid options), it’s always okay to ask that the writers you are working with be professional about communication, payment, and deadlines. In some industries, guest writers will write for links. Consider yourself lucky if that’s true. Remember, though, that the final paycheck can be great leverage for getting a writer to do exactly what you need them to (such as making their deadlines).

Tools to help with content creation

So those are some things you need to have in place before you create content. Now’s the fun part: getting started. One of the beautiful things about the Internet is that new and exciting tools crop up every day to help make our jobs easier and more efficient. Here are a few of our favorites.

Calendars

You can always use Excel or a Google Doc to set up your editorial calendar, but we really like Trello for the ability to gather a lot of information in one card and then drag and drop it into place. Once there are actual dates attached to your content, you might be happier with something like a Google Calendar.

Ideation and research

If you need a quick fix for ideation, turn your keywords into wacky ideas with Portent’s Title Maker. You probably won’t want to write to the exact title you’re given (although “True Facts about Justin Bieber’s Love of Pickles” does sound pretty fascinating…), but it’s a good way to get loose and look at your topic from a new angle.

Once you’ve got that idea solidified, find out what your audience thinks about it by gathering information with Survey Monkey or your favorite survey tool. Or, use Storify to listen to what people are saying about your topic across a wide variety of platforms. You can also use Storify to save those references and turn them into a piece of content or an illustration for one. Don’t forget that a simple social ask can also do wonders.

Format

Content doesn’t have to be all about the words. Screencasts, Google+ Hangouts, and presentations are all interesting ways to approach content. Remember that not everyone’s a reader. Some of your audience will be more interested in visual or interactive content. Make something for everyone.

Illustration

Don’t forget to make your content pretty. It’s not that hard to find free stock images online (just make sure you aren’t violating someone’s copyright). We like Morgue File, Free Images, and Flickr’s Creative Commons. If you aren’t into stock images and don’t have access to in-house graphic design, it’s still relatively easy to add images to your content. Pull a screenshot with Skitch or dress up an existing image with Pixlr. You can also use something like Canva to create custom graphics.

Don’t stop with static graphics, though. There are so many tools out there to help you create gifs, quizzes and polls, maps, and even interactive timelines. Dream it, then search for it. Chances are whatever you’re thinking of is doable.

Quality, not quantity

Mediocre content will hurt your cause

Less is more. That’s not an excuse to pare your blog down to one post per month (check out our publishing cadence experiment), but it is an important reminder that if you’re writing “How to Properly Install a Toilet Seat” two days after publishing “Toilet Seat Installation for Dummies,” you might want to rethink your strategy.

The thing is, and I’m going to use another cliché here to drive home the point, you never get a second chance to make a first impression. Potential customers are roving the Internet right now looking for exactly what you’re selling. And if what they find is an only somewhat informative article stuffed with keywords and awful spelling and grammar mistakes… well, you don’t want that. Oh, and search engines think it’s spammy too…

A word about copyright

We’re not copyright lawyers, so we can’t give you the ins and outs on all the technicalities. What we can tell you (and you already know this) is that it’s not okay to steal someone else’s work. You wouldn’t want them to do it to you. This includes images. So whenever you can, make your own images or find images that you can either purchase the rights to (stock imagery) or license under Creative Commons.

It’s usually okay to quote short portions of text, as long as you attribute the original source (and a link is nice). In general, titles and ideas can’t be copyrighted (though they might be trademarked or patented). When in doubt, asking for permission is smart.

That said, part of the fun of the Internet is the remixing culture which includes using things like memes and gifs. Just know that if you go that route, there is a certain amount of risk involved.

Editing

Your content needs to go through at least one editing cycle by someone other than the original author. There are two types of editing, developmental (which looks at the underlying structure of a piece that happens earlier in the writing cycle) and copy editing (which makes sure all the words are there and spelled right in the final draft).

If you have a very small team or are in a rush (and are working with writers that have some skill), you can often skip the developmental editing phase. But know that an investment in that close read of an early draft is often beneficial to the piece and to the writer’s overall growth.

Many content teams peer-edit work, which can be great. Other organizations prefer to run their work by a dedicated editor. There’s no wrong answer, as long as the work gets edited.

Ensuring proper basic SEO

The good news is that search engines are doing their best to get closer and closer to understanding and processing natural language. So good writing (including the natural use of synonyms rather than repeating those keywords over and over and…) will take you a long way towards SEO mastery.

For that reason (and because it’s easy to get trapped in keyword thinking and veer into keyword stuffing), it’s often nice to think of your SEO check as a further edit of the post rather than something you should think about as you’re writing.

But there are still a few things you can do to help cover those SEO bets. Once you have that draft, do a pass for SEO to make sure you’ve covered the following:

  • Use your keyword in your title
  • Use your keyword (or long-tail keyword phrase) in an H2
  • Make sure the keyword appears at least once (though not more than four times, especially if it’s a phrase) in the body of the post
  • Use image alt text (including the keyword when appropriate)

Finding time to write when you don’t have any

Writing (assuming you’re the one doing the writing) can require a lot of energy—especially if you want to do it well. The best way to find time to write is to break each project down into little tasks. For example, writing a blog post actually breaks down into these steps (though not always in this order):

  • Research
  • Outline
  • Fill in outline
  • Rewrite and finish post
  • Write headline
  • SEO check
  • Final edit
  • Select hero image (optional)

So if you only have random chunks of time, set aside 15-30 minutes one day (when your research is complete) to write a really great outline. Then find an hour the next to fill that outline in. After an additional hour the following day, (unless you’re dealing with a research-heavy post) you should have a solid draft by the end of day three.

The magic of working this way is that you engage your brain and then give it time to work in the background while you accomplish other tasks. Hemingway used to stop mid-sentence at the end of his writing days for the same reason.

Once you have that draft nailed, the rest of the steps are relatively easy (even the headline, which often takes longer to write than any other sentence, is easier after you’ve immersed yourself in the post over a few days).

Working with design/development

Every designer and developer is a little different, so we can’t give you any blanket cure-alls for inter-departmental workarounds (aka “smashing silos”). But here are some suggestions to help you convey your vision while capitalizing on the expertise of your coworkers to make your content truly excellent.

Ask for feedback

From the initial brainstorm to general questions about how to work together, asking your team members what they think and prefer can go a long way. Communicate all the details you have (especially the unspoken expectations) and then listen.

If your designer tells you up front that your color scheme is years out of date, you’re saving time. And if your developer tells you that the interactive version of that timeline will require four times the resources, you have the info you need to fight for more budget (or reassess the project).

Check in

Things change in the design and development process. If you have interim check-ins already set up with everyone who’s working on the project, you’ll avoid the potential for nasty surprises at the end. Like finding out that no one has experience working with that hot new coding language you just read about and they’re trying to do a workaround that isn’t working.

Proofread

Your job isn’t done when you hand over the copy to your designer or developer. Not only might they need help rewriting some of your text so that it fits in certain areas, they will also need you to proofread the final version. Accidents happen in the copy-and-paste process and there’s nothing sadder than a really beautiful (and expensive) piece of content that wraps up with a typo:

Know when to fight for an idea

Conflict isn’t fun, but sometimes it’s necessary. The more people involved in your content, the more watered down the original idea can get and the more roadblocks and conflicting ideas you’ll run into. Some of that is very useful. But sometimes you’ll get pulled off track. Always remember who owns the final product (this may not be you) and be ready to stand up for the idea if it’s starting to get off track.

We’re confident this list will set you on the right path to creating some really awesome content, but is there more you’d like to know? Ask us your questions in the comments.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 1 year ago from tracking.feedpress.it

Pinpoint vs. Floodlight Content and Keyword Research Strategies – Whiteboard Friday

Posted by randfish

When we’re doing keyword research and targeting, we have a choice to make: Are we targeting broader keywords with multiple potential searcher intents, or are we targeting very narrow keywords where it’s pretty clear what the searchers were looking for? Those different approaches, it turns out, apply to content creation and site architecture, as well. In today’s Whiteboard Friday, Rand illustrates that connection.

Pinpoint vs Floodlight Content and Keyword Research Strategy Whiteboard

For reference, here are stills of this week’s whiteboards. Click on it to open a high resolution image in a new tab!

Video Transcription

Howdy, Moz fans, and welcome to another edition of Whiteboard Friday. This week we’re going to chat about pinpoint versus floodlight tactics for content targeting, content strategy, and keyword research, keyword targeting strategy. This is also called the shotgun versus sniper approach, but I’m not a big gun fan. So I’m going to stick with my floodlight versus pinpoint, plus, you know, for the opening shot we don’t have a whole lot of weaponry here at Moz, but we do have lighting.

So let’s talk through this at first. You’re going through and doing some keyword research. You’re trying to figure out which terms and phrases to target. You might look down a list like this.

Well, maybe, I’m using an example here around antique science equipment. So you see these various terms and phrases. You’ve got your volume numbers. You probably have lots of other columns. Hopefully, you’ve watched the Whiteboard Friday on how to do keyword research like it’s 2015 and not 2010.

So you know you have all these other columns to choose from, but I’m simplifying here for the purpose of this experiment. So you might choose some of these different terms. Now, they’re going to have different kinds of tactics and a different strategic approach, depending on the breadth and depth of the topic that you’re targeting. That’s going to determine what types of content you want to create and where you place it in your information architecture. So I’ll show you what I mean.

The floodlight approach

For antique science equipment, this is a relatively broad phrase. I’m going to do my floodlight analysis on this, and floodlight analysis is basically saying like, “Okay, are there multiple potential searcher intents?” Yeah, absolutely. That’s a fairly broad phase. People could be looking to transact around it. They might be looking for research information, historical information, different types of scientific equipment that they’re looking for.

<img src="http://d1avok0lzls2w.cloudfront.net/uploads/blog/55b15fc96679b8.73854740.jpg" rel="box-shadow: 0 0 10px 0 #999; border-radius: 20px;"

Are there four or more approximately unique keyword terms and phrases to target? Well, absolutely, in fact, there’s probably more than that. So antique science equipment, antique scientific equipment, 18th century scientific equipment, all these different terms and phrases that you might explore there.

Is this a broad content topic with many potential subtopics? Again, yes is the answer to this. Are we talking about generally larger search volume? Again, yes, this is going to have a much larger search volume than some of the narrower terms and phrases. That’s not always the case, but it is here.

The pinpoint approach

For pinpoint analysis, we kind of go the opposite direction. So we might look at a term like antique test tubes, which is a very specific kind of search, and that has a clear single searcher intent or maybe two. Someone might be looking for actually purchasing one of those, or they might be looking to research them and see what kinds there are. Not a ton of additional intents behind that. One to three unique keywords, yeah, probably. It’s pretty specific. Antique test tubes, maybe 19th century test tubes, maybe old science test tubes, but you’re talking about a limited set of keywords that you’re targeting. It’s a narrow content topic, typically smaller search volume.

<img src="http://d1avok0lzls2w.cloudfront.net/uploads/blog/55b160069eb6b1.12473448.jpg" rel="box-shadow: 0 0 10px 0 #999; border-radius: 20px;"

Now, these are going to feed into your IA, your information architecture, and your site structure in this way. So floodlight content generally sits higher up. It’s the category or the subcategory, those broad topic terms and phrases. Those are going to turn into those broad topic category pages. Then you might have multiple, narrower subtopics. So we could go into lab equipment versus astronomical equipment versus chemistry equipment, and then we’d get into those individual pinpoints from the pinpoint analysis.

How do I decide which approach is best for my keywords?

Why are we doing this? Well, generally speaking, if you can take your terms and phrases and categorize them like this and then target them differently, you’re going to provide a better, more logical user experience. Someone who searches for antique scientific equipment, they’re going to really expect to see that category and then to be able to drill down into things. So you’re providing them the experience they predict, the one that they want, the one that they expect.

It’s better for topic modeling analysis and for all of the algorithms around things like Hummingbird, where Google looks at: Are you using the types of terms and phrases, do you have the type of architecture that we expect to find for this keyword?

It’s better for search intent targeting, because the searcher intent is going to be fulfilled if you provide the multiple paths versus the narrow focus. It’s easier keyword targeting for you. You’re going to be able to know, “Hey, I need to target a lot of different terms and phrases and variations in floodlight and one very specific one in pinpoint.”

There’s usually higher searcher satisfaction, which means you get lower bounce rate. You get more engagement. You usually get a higher conversion rate. So it’s good for all those things.

For example…

I’ll actually create pages for each of antique scientific equipment and antique test tubes to illustrate this. So I’ve got two different types of pages here. One is my antique scientific equipment page.

<img src="http://d1avok0lzls2w.cloudfront.net/uploads/blog/55b161fa871e32.54731215.jpg" rel="box-shadow: 0 0 10px 0 #999; border-radius: 20px;"

This is that floodlight, shotgun approach, and what we’re doing here is going to be very different from a pinpoint approach. It’s looking at like, okay, you’ve landed on antique scientific equipment. Now, where do you want to go? What do you want to specifically explore? So we’re going to have a little bit of content specifically about this topic, and how robust that is depends on the type of topic and the type of site you are.

If this is an e-commerce site or a site that’s showing information about various antiques, well maybe we don’t need very much content here. You can see the filtration that we’ve got is going to be pretty broad. So I can go into different centuries. I can go into chemistry, astronomy, physics. Maybe I have a safe for kids type of stuff if you want to buy your kids antique lab equipment, which you might be. Who knows? Maybe you’re awesome and your kids are too. Then different types of stuff at a very broad level. So I can go to microscopes or test tubes, lab searches.

This is great because it’s got broad intent foci, serving many different kinds of searchers with the same page because we don’t know exactly what they want. It’s got multiple keyword targets so that we can go after broad phrases like antique or old or historical or 13th, 14th, whatever century, science and scientific equipment ,materials, labs, etc., etc., etc. This is a broad page that could reach any and all of those. Then there’s lots of navigational and refinement options once you get there.

Total opposite of pinpoint content.

<img src="http://d1avok0lzls2w.cloudfront.net/uploads/blog/55b1622740f0b5.73477500.jpg" rel="box-shadow: 0 0 10px 0 #999; border-radius: 20px;"

Pinpoint content, like this antique test tubes page, we’re still going to have some filtration options, but one of the important things to note is note how these are links that take you deeper. Depending on how deep the search volume goes in terms of the types of queries that people are performing, you might want to make a specific page for 17th century antique test tubes. You might not, and if you don’t want to do that, you can have these be filters that are simply clickable and change the content of the page here, narrowing the options rather than creating completely separate pages.

So if there’s no search volume for these different things and you don’t think you need to separately target them, go ahead and just make them filters on the data that already appears on this page or the results that are already in here as opposed to links that are going to take you deeper into specific content and create a new page, a new experience.

You can also see I’ve got my individual content here. I probably would go ahead and add some content specifically to this page that is just unique here and that describes antique test tubes and the things that your searchers need. They might want to know things about price. They might want to know things about make and model. They might want to know things about what they were used for. Great. You can have that information broadly, and then individual pieces of content that someone might dig into.

This is narrower intent foci obviously, serving maybe one or two searcher intents. This is really talking about targeting maybe one to two separate keywords. So antique test tubes, maybe lab tubes or test tube sets, but not much beyond that.

Ten we’re going to have fewer navigational paths, fewer distractions. We want to keep the searcher. Because we know their intent, we want to guide them along the path that we know they probably want to take and that we want them to take.

So when you’re considering your content, choose wisely between shotgun/floodlight approach or sniper/pinpoint approach. Your searchers will be better served. You’ll probably rank better. You’ll be more likely to earn links and amplification. You’re going to be more successful.

Looking forward to the comments, and we’ll see you again next week for another edition of Whiteboard Friday. Take care.

Video transcription by Speechpad.com

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 1 year ago from tracking.feedpress.it