Changes to how you export and delete contacts in advance of the GDPR

.imageborder {border: 2px solid #e9e9e9; border-radius: 2px; margin-bottom: 32px !important;}

Managing your contacts

As of today, we have new ways of exporting and deleting contacts. Some of these changes are to help you get ready for the GDPR, whilst some are to make managing your contacts easier and build on the new contact editor we launched earlier in the year.

Deleting

Previously, deleting a contact would hide her in your account. You couldn’t get her back unless you re-added her, at which point we’d resurrect the data you’d previously held on her.

But now, when you delete a contact, she’ll go into the recycle bin (previously called ‘Utilities’). She’ll stay there for 30 days, and you can undelete her at any time.

After 30 days, she’ll be removed permanently along with all her information held in contact data fields and Insight data.

If you want to, you can permanently delete her before the 30 days are up directly from the recycle bin.

This means you can now use the delete tool to comply with GDPR (or other) data deletion requests.

Additionally, we’ve made it possible to delete a contact from the contact editor, rather than just from the contact listing page – which should make things just a little bit simpler.


Deleting suppressed contacts

Delete suppressed contact

A suppressed contact is one you can’t email (maybe because she unsubscribed, your previous emails to her have bounced, or another one of a handful of reasons).

When a contact becomes suppressed, we don’t remove the data you’ve collected on her; if she was to become unsuppressed, her old data would be viewable again too.

However, we now offer the option of deleting a suppressed user.

This means you can comply with ‘right to be forgotten’ or similar regulatory requests.

But deleting a suppressed contact differs in one crucial way to deleting a normal contact: we won’t delete the email address. This is so we can continue to keep her suppressed, and so you don’t unintentionally email her in the future (by accidentally re-importing the contact to your account, for example).


Exporting

Export contact data

Up until now, exporting a contact meant exporting an address book they were in. This would give you the data held in your data fields (along with that of every other contact in the address book – which probably wasn’t what you wanted).

Exporting a contact is now easier and more complete. You can export an individual contact from the contact editor, and exports now additionally contain all Insight data you hold for them. This means that when you export a contact, you’ll now get a zip file with everything from the Email area of dotmailer – which will also be in a usable format for GDPR ‘Subject Access Requests’, should you need to fulfil one.

Note that if you have data held in the other areas of dotmailer (surveys and forms, SMS or transactional email) you’ll still have to export that separately.

Individual contact exports will also be kept for seven days in your export area, just like bulk exports.


More on the GDPR

Whether you’re in the midst of preparing for the GDPR, or if you’re yet to start, we have lots of articles to help you get ready. Check them all out here.

The post Changes to how you export and delete contacts in advance of the GDPR appeared first on The Marketing Automation Blog.

Reblogged 5 days ago from blog.dotmailer.com

What’s new: Changes to the things you use every day

As a Product Manager, I spend a lot of time thinking about how I can make our big releases impact you in the best way possible. Our next big release is in February and will contain a number of great new things for our customers who sell (online or otherwise).

But we haven’t only been working on improvements for those of you with shops. We’ve been looking at how you create campaigns – any campaigns – from conception through to editing. And rather than make you wait until February, we’re launching them today. Here’s what’s changed.

Drag and drop template uploader

When you come to upload a template (or a one-off campaign), you’ll notice we’ve replaced the old interface with a drag and drop canvas. You can now drag files from anywhere on your computer straight into dotmailer (although you can click and select too if you find that easier). What’s more, you can drag in as many files as you like, as often as you like. It’s also lightning fast. Tip: try dragging in a zip file, too!

Campaign details with added emojis 😲👍👏

Subject lines. The first thing your contacts see. Proven to increase (or decrease) open rates. We think they’re so important, we’ve redesigned the ‘campaign details’ page to help you come up with subject lines that win.

You can now – finally – add emojis using the searchable picker. Combined with your skills and the personalization picker, your subject lines can now be expertly written, personalized and eye catching.

We’ve also improved the preview window that gives you an example of how your campaign details will look when your email arrives in an inbox. No, we didn’t much like the blue Outlook panel either, so it’s gone and been replaced with an inbox mock-up.

A clearer, cleaner EasyEditor

We’ve changed the building blocks in EasyEditor from pink to grey. Well, we’ve done a lot more than that, but that’s the most noticeable change. We also studied how you interacted with blocks, noticed some old design decisions that could be way better, and improved them.

For example, the header bar that contained the move, copy and delete tools would sometimes be inside a block, and sometimes outside. We knew why this was, but it turned out you didn’t, and it was just plain annoying. And why was the drag area so small? And why was it you couldn’t always see what type of block was selected? We’ve fixed all these things – and more – to create an easier, more consistent experience.

You’ll also notice the new blocks in our segment and landing page editor, too.

And more…

Finally, we’ve tweaked the Settings menu slightly to prepare for more changes later this month. In particular, your users, API users and transactional email users are now found under the ‘Access’ option.

The post What’s new: Changes to the things you use every day appeared first on The Email Marketing Blog.

Reblogged 11 months ago from blog.dotmailer.com

Meet Dan Morris, Executive Vice President, North America

  1. Why did you decide to come to dotmailer?

The top three reasons were People, Product and Opportunity. I met the people who make up our business and heard their stories from the past 18 years, learned about the platform and market leading status they had built in the UK, and saw that I could add value with my U.S. high growth business experience. I’ve been working with marketers, entrepreneurs and business owners for years across a series of different roles, and saw that I could apply what I’d learned from that and the start-up space to dotmailer’s U.S. operation. dotmailer has had clients in the U.S. for 12 years and we’re positioned to grow the user base of our powerful and easy-to-use platform significantly. I knew I could make a difference here, and what closed the deal for me was the people.  Every single person I’ve met is deeply committed to the business, to the success of our customers and to making our solution simple and efficient.  We’re a great group of passionate people and I’m proud to have joined the dotfamily.

Dan Morris, dotmailer’s EVP for North America in the new NYC office

      1. Tell us a bit about your new role

dotmailer has been in business and in this space for more than 18 years. We were a web agency, then a Systems Integrator, and we got into the email business that way, ultimately building the dotmailer platform thousands of people use daily. This means we know this space better than anyone and we have the perfect solutions to align closely with our customers and the solutions flexible enough to grow with them.  My role is to take all that experience and the platform and grow our U.S. presence. My early focus has been on identifying the right team to execute our growth plans. We want to be the market leader in the U.S. in the next three years – just like we’ve done in the UK –  so getting the right people in the right spots was critical.  We quickly assessed the skills of the U.S. team and made changes that were necessary in order to provide the right focus on customer success. Next, we set out to completely rebuild dotmailer’s commercial approach in the U.S.  We simplified our offers to three bundles, so that pricing and what’s included in those bundles is transparent to our customers.  We’ve heard great things about this already from clients and partners. We’re also increasing our resources on customer success and support.  We’re intensely focused on ease of on-boarding, ease of use and speed of use.  We consistently hear how easy and smooth a process it is to use dotmailer’s tools.  That’s key for us – when you buy a dotmailer solution, we want to onboard you quickly and make sure you have all of your questions answered right away so that you can move right into using it.  Customers are raving about this, so we know it’s working well.

  1. What early accomplishments are you most proud of from your dotmailer time so far?

I’ve been at dotmailer for eight months now and I’m really proud of all we’ve accomplished together.  We spent a lot of time assessing where we needed to restructure and where we needed to invest.  We made the changes we needed, invested in our partner program, localized tech support, customer on-boarding and added customer success team members.  We have the right people in the right roles and it’s making a difference.  We have a commercial approach that is clear with the complete transparency that we wanted to provide our customers.  We’ve got a more customer-focused approach and we’re on-boarding customers quickly so they’re up and running faster.  We have happier customers than ever before and that’s the key to everything we do.

  1. You’ve moved the U.S. team to a new office. Can you tell us why and a bit about the new space?

I thought it was very important to create a NY office space that was tied to branding and other offices around the world, and also had its own NY energy and culture for our team here – to foster collaboration and to have some fun.  It was also important for us that we had a flexible space where we could welcome customers, partners and resellers, and also hold classes and dotUniversity training sessions. I’m really grateful to the team who worked on the space because it really reflects our team and what we care about.   At any given time, you’ll see a training session happening, the team collaborating, a customer dropping in to ask a few questions or a partner dropping in to work from here.  We love our new, NYC space.

We had a spectacular reception this week to celebrate the opening of this office with customers, partners and the dotmailer leadership team in attendance. Please take a look at the photos from our event on Facebook.

Guests and the team at dotmailer's new NYC office warming party

Guests and the team at dotmailer’s new NYC office warming party

  1. What did you learn from your days in the start-up space that you’re applying at dotmailer?

The start-up space is a great place to learn. You have to know where every dollar is going and coming from, so every choice you make needs to be backed up with a business case for that investment.  You try lots of different things to see if they’ll work and you’re ready to turn those tactics up or down quickly based on an assessment of the results. You also learn things don’t have to stay the way they are, and can change if you make them change. You always listen and learn – to customers, partners, industry veterans, advisors, etc. to better understand what’s working and not working.  dotmailer has been in business for 18 years now, and so there are so many great contributors across the business who know how things have worked and yet are always keen to keep improving.  I am constantly in listening and learning mode so that I can understand all of the unique perspectives our team brings and what we need to act on.

  1. What are your plans for the U.S. and the sales function there?

On our path to being the market leader in the U.S., I’m focused on three things going forward: 1 – I want our customers to be truly happy.  It’s already a big focus in the dotmailer organization – and we’re working hard to understand their challenges and goals so we can take product and service to the next level. 2 – Creating an even more robust program around partners, resellers and further building out our channel partners to continuously improve sales and customer service programs. We recently launched a certification program to ensure partners have all the training and resources they need to support our mutual customers.  3 – We have an aggressive growth plan for the U.S. and I’m very focused on making sure our team is well trained, and that we remain thoughtful and measured as we take the steps to grow.  We want to always keep an eye on what we’re known for – tools that are powerful and simple to use – and make sure everything else we offer remains accessible and valuable as we execute our growth plans.

  1. What are the most common questions that you get when speaking to a prospective customer?

The questions we usually get are around price, service level and flexibility.  How much does dotmailer cost?  How well are you going to look after my business?  How will you integrate into my existing stack and then my plans for future growth? We now have three transparent bundle options with specifics around what’s included published right on our website.  We have introduced a customer success team that’s focused only on taking great care of our customers and we’re hearing stories every day that tells me this is working.  And we have all of the tools to support our customers as they grow and to also integrate into their existing stacks – often integrating so well that you can use dotmailer from within Magento, Salesforce or Dynamics, for example.

  1. Can you tell us about the dotmailer differentiators you highlight when speaking to prospective customers that seem to really resonate?

In addition to the ones above – ease of use, speed of use and the ability to scale with you. With dotmailer’s tiered program, you can start with a lighter level of functionality and grow into more advanced functionality as you need it. The platform itself is so easy to use that most marketers are able to build campaigns in minutes that would have taken hours on other platforms. Our customer success team is also with you all the way if ever you want or need help.  We’ve built a very powerful platform and we have a fantastic team to help you with personalized service as an extended part of your team and we’re ready to grow with you.

  1. How much time is your team on the road vs. in the office? Any road warrior tips to share?

I’ve spent a lot of time on the road, one year I attended 22 tradeshows! Top tip when flying is to be willing to give up your seat for families or groups once you’re at the airport gate, as you’ll often be rewarded with a better seat for helping the airline make the family or group happy. Win win! Since joining dotmailer, I’m focused on being in office and present for the team and customers as much as possible. I can usually be found in our new, NYC office where I spend a lot of time with our team, in customer meetings, in trainings and other hosted events, sales conversations or marketing meetings. I’m here to help the team, clients and partners to succeed, and will always do my best to say yes! Once our prospective customers see how quickly and efficiently they can execute tasks with dotmailer solutions vs. their existing solutions, it’s a no-brainer for them.  I love seeing and hearing their reactions.

  1. Tell us a bit about yourself – favorite sports team, favorite food, guilty pleasure, favorite band, favorite vacation spot?

I’m originally from Yorkshire in England, and grew up just outside York. I moved to the U.S. about seven years ago to join a very fast growing startup, we took it from 5 to well over 300 people which was a fantastic experience. I moved to NYC almost two years ago, and I love exploring this great city.  There’s so much to see and do.  Outside of dotmailer, my passion is cars, and I also enjoy skeet shooting, almost all types of music, and I love to travel – my goal is to get to India, Thailand, Australia and Japan in the near future.

Want to find out more about the dotfamily? Check out our recent post about Darren Hockley, Global Head of Support.

Reblogged 1 year ago from blog.dotmailer.com

Google Updates The General Guidelines Section Of Their Webmaster Guidelines

Google has made significant changes to the content on their Webmaster Guidelines documentation.

The post Google Updates The General Guidelines Section Of Their Webmaster Guidelines appeared first on Search Engine Land.

Please visit Search Engine Land for the full article.

Reblogged 1 year ago from feeds.searchengineland.com

Stop Ghost Spam in Google Analytics with One Filter

Posted by CarloSeo

The spam in Google Analytics (GA) is becoming a serious issue. Due to a deluge of referral spam from social buttons, adult sites, and many, many other sources, people are starting to become overwhelmed by all the filters they are setting up to manage the useless data they are receiving.

The good news is, there is no need to panic. In this post, I’m going to focus on the most common mistakes people make when fighting spam in GA, and explain an efficient way to prevent it.

But first, let’s make sure we understand how spam works. A couple of months ago, Jared Gardner wrote an excellent article explaining what referral spam is, including its intended purpose. He also pointed out some great examples of referral spam.

Types of spam

The spam in Google Analytics can be categorized by two types: ghosts and crawlers.

Ghosts

The vast majority of spam is this type. They are called ghosts because they never access your site. It is important to keep this in mind, as it’s key to creating a more efficient solution for managing spam.

As unusual as it sounds, this type of spam doesn’t have any interaction with your site at all. You may wonder how that is possible since one of the main purposes of GA is to track visits to our sites.

They do it by using the Measurement Protocol, which allows people to send data directly to Google Analytics’ servers. Using this method, and probably randomly generated tracking codes (UA-XXXXX-1) as well, the spammers leave a “visit” with fake data, without even knowing who they are hitting.

Crawlers

This type of spam, the opposite to ghost spam, does access your site. As the name implies, these spam bots crawl your pages, ignoring rules like those found in robots.txt that are supposed to stop them from reading your site. When they exit your site, they leave a record on your reports that appears similar to a legitimate visit.

Crawlers are harder to identify because they know their targets and use real data. But it is also true that new ones seldom appear. So if you detect a referral in your analytics that looks suspicious, researching it on Google or checking it against this list might help you answer the question of whether or not it is spammy.

Most common mistakes made when dealing with spam in GA

I’ve been following this issue closely for the last few months. According to the comments people have made on my articles and conversations I’ve found in discussion forums, there are primarily three mistakes people make when dealing with spam in Google Analytics.

Mistake #1. Blocking ghost spam from the .htaccess file

One of the biggest mistakes people make is trying to block Ghost Spam from the .htaccess file.

For those who are not familiar with this file, one of its main functions is to allow/block access to your site. Now we know that ghosts never reach your site, so adding them here won’t have any effect and will only add useless lines to your .htaccess file.

Ghost spam usually shows up for a few days and then disappears. As a result, sometimes people think that they successfully blocked it from here when really it’s just a coincidence of timing.

Then when the spammers later return, they get worried because the solution is not working anymore, and they think the spammer somehow bypassed the barriers they set up.

The truth is, the .htaccess file can only effectively block crawlers such as buttons-for-website.com and a few others since these access your site. Most of the spam can’t be blocked using this method, so there is no other option than using filters to exclude them.

Mistake #2. Using the referral exclusion list to stop spam

Another error is trying to use the referral exclusion list to stop the spam. The name may confuse you, but this list is not intended to exclude referrals in the way we want to for the spam. It has other purposes.

For example, when a customer buys something, sometimes they get redirected to a third-party page for payment. After making a payment, they’re redirected back to you website, and GA records that as a new referral. It is appropriate to use referral exclusion list to prevent this from happening.

If you try to use the referral exclusion list to manage spam, however, the referral part will be stripped since there is no preexisting record. As a result, a direct visit will be recorded, and you will have a bigger problem than the one you started with since. You will still have spam, and direct visits are harder to track.

Mistake #3. Worrying that bounce rate changes will affect rankings

When people see that the bounce rate changes drastically because of the spam, they start worrying about the impact that it will have on their rankings in the SERPs.

bounce.png

This is another mistake commonly made. With or without spam, Google doesn’t take into consideration Google Analytics metrics as a ranking factor. Here is an explanation about this from Matt Cutts, the former head of Google’s web spam team.

And if you think about it, Cutts’ explanation makes sense; because although many people have GA, not everyone uses it.

Assuming your site has been hacked

Another common concern when people see strange landing pages coming from spam on their reports is that they have been hacked.

landing page

The page that the spam shows on the reports doesn’t exist, and if you try to open it, you will get a 404 page. Your site hasn’t been compromised.

But you have to make sure the page doesn’t exist. Because there are cases (not spam) where some sites have a security breach and get injected with pages full of bad keywords to defame the website.

What should you worry about?

Now that we’ve discarded security issues and their effects on rankings, the only thing left to worry about is your data. The fake trail that the spam leaves behind pollutes your reports.

It might have greater or lesser impact depending on your site traffic, but everyone is susceptible to the spam.

Small and midsize sites are the most easily impacted – not only because a big part of their traffic can be spam, but also because usually these sites are self-managed and sometimes don’t have the support of an analyst or a webmaster.

Big sites with a lot of traffic can also be impacted by spam, and although the impact can be insignificant, invalid traffic means inaccurate reports no matter the size of the website. As an analyst, you should be able to explain what’s going on in even in the most granular reports.

You only need one filter to deal with ghost spam

Usually it is recommended to add the referral to an exclusion filter after it is spotted. Although this is useful for a quick action against the spam, it has three big disadvantages.

  • Making filters every week for every new spam detected is tedious and time-consuming, especially if you manage many sites. Plus, by the time you apply the filter, and it starts working, you already have some affected data.
  • Some of the spammers use direct visits along with the referrals.
  • These direct hits won’t be stopped by the filter so even if you are excluding the referral you will sill be receiving invalid traffic, which explains why some people have seen an unusual spike in direct traffic.

Luckily, there is a good way to prevent all these problems. Most of the spam (ghost) works by hitting GA’s random tracking-IDs, meaning the offender doesn’t really know who is the target, and for that reason either the hostname is not set or it uses a fake one. (See report below)

Ghost-Spam.png

You can see that they use some weird names or don’t even bother to set one. Although there are some known names in the list, these can be easily added by the spammer.

On the other hand, valid traffic will always use a real hostname. In most of the cases, this will be the domain. But it also can also result from paid services, translation services, or any other place where you’ve inserted GA tracking code.

Valid-Referral.png

Based on this, we can make a filter that will include only hits that use real hostnames. This will automatically exclude all hits from ghost spam, whether it shows up as a referral, keyword, or pageview; or even as a direct visit.

To create this filter, you will need to find the report of hostnames. Here’s how:

  1. Go to the Reporting tab in GA
  2. Click on Audience in the lefthand panel
  3. Expand Technology and select Network
  4. At the top of the report, click on Hostname

Valid-list

You will see a list of all hostnames, including the ones that the spam uses. Make a list of all the valid hostnames you find, as follows:

  • yourmaindomain.com
  • blog.yourmaindomain.com
  • es.yourmaindomain.com
  • payingservice.com
  • translatetool.com
  • anotheruseddomain.com

For small to medium sites, this list of hostnames will likely consist of the main domain and a couple of subdomains. After you are sure you got all of them, create a regular expression similar to this one:

yourmaindomain\.com|anotheruseddomain\.com|payingservice\.com|translatetool\.com

You don’t need to put all of your subdomains in the regular expression. The main domain will match all of them. If you don’t have a view set up without filters, create one now.

Then create a Custom Filter.

Make sure you select INCLUDE, then select “Hostname” on the filter field, and copy your expression into the Filter Pattern box.

filter

You might want to verify the filter before saving to check that everything is okay. Once you’re ready, set it to save, and apply the filter to all the views you want (except the view without filters).

This single filter will get rid of future occurrences of ghost spam that use invalid hostnames, and it doesn’t require much maintenance. But it’s important that every time you add your tracking code to any service, you add it to the end of the filter.

Now you should only need to take care of the crawler spam. Since crawlers access your site, you can block them by adding these lines to the .htaccess file:

## STOP REFERRER SPAM 
RewriteCond %{HTTP_REFERER} semalt\.com [NC,OR] 
RewriteCond %{HTTP_REFERER} buttons-for-website\.com [NC] 
RewriteRule .* - [F]

It is important to note that this file is very sensitive, and misplacing a single character it it can bring down your entire site. Therefore, make sure you create a backup copy of your .htaccess file prior to editing it.

If you don’t feel comfortable messing around with your .htaccess file, you can alternatively make an expression with all the crawlers, then and add it to an exclude filter by Campaign Source.

Implement these combined solutions, and you will worry much less about spam contaminating your analytics data. This will have the added benefit of freeing up more time for you to spend actually analyze your valid data.

After stopping spam, you can also get clean reports from the historical data by using the same expressions in an Advance Segment to exclude all the spam.

Bonus resources to help you manage spam

If you still need more information to help you understand and deal with the spam on your GA reports, you can read my main article on the subject here: http://www.ohow.co/what-is-referrer-spam-how-stop-it-guide/.

Additional information on how to stop spam can be found at these URLs:

In closing, I am eager to hear your ideas on this serious issue. Please share them in the comments below.

(Editor’s Note: All images featured in this post were created by the author.)

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 2 years ago from tracking.feedpress.it

Distance from Perfect

Posted by wrttnwrd

In spite of all the advice, the strategic discussions and the conference talks, we Internet marketers are still algorithmic thinkers. That’s obvious when you think of SEO.

Even when we talk about content, we’re algorithmic thinkers. Ask yourself: How many times has a client asked you, “How much content do we need?” How often do you still hear “How unique does this page need to be?”

That’s 100% algorithmic thinking: Produce a certain amount of content, move up a certain number of spaces.

But you and I know it’s complete bullshit.

I’m not suggesting you ignore the algorithm. You should definitely chase it. Understanding a little bit about what goes on in Google’s pointy little head helps. But it’s not enough.

A tale of SEO woe that makes you go “whoa”

I have this friend.

He ranked #10 for “flibbergibbet.” He wanted to rank #1.

He compared his site to the #1 site and realized the #1 site had five hundred blog posts.

“That site has five hundred blog posts,” he said, “I must have more.”

So he hired a few writers and cranked out five thousand blogs posts that melted Microsoft Word’s grammar check. He didn’t move up in the rankings. I’m shocked.

“That guy’s spamming,” he decided, “I’ll just report him to Google and hope for the best.”

What happened? Why didn’t adding five thousand blog posts work?

It’s pretty obvious: My, uh, friend added nothing but crap content to a site that was already outranked. Bulk is no longer a ranking tactic. Google’s very aware of that tactic. Lots of smart engineers have put time into updates like Panda to compensate.

He started like this:

And ended up like this:
more posts, no rankings

Alright, yeah, I was Mr. Flood The Site With Content, way back in 2003. Don’t judge me, whippersnappers.

Reality’s never that obvious. You’re scratching and clawing to move up two spots, you’ve got an overtasked IT team pushing back on changes, and you’ve got a boss who needs to know the implications of every recommendation.

Why fix duplication if rel=canonical can address it? Fixing duplication will take more time and cost more money. It’s easier to paste in one line of code. You and I know it’s better to fix the duplication. But it’s a hard sell.

Why deal with 302 versus 404 response codes and home page redirection? The basic user experience remains the same. Again, we just know that a server should return one home page without any redirects and that it should send a ‘not found’ 404 response if a page is missing. If it’s going to take 3 developer hours to reconfigure the server, though, how do we justify it? There’s no flashing sign reading “Your site has a problem!”

Why change this thing and not that thing?

At the same time, our boss/client sees that the site above theirs has five hundred blog posts and thousands of links from sites selling correspondence MBAs. So they want five thousand blog posts and cheap links as quickly as possible.

Cue crazy music.

SEO lacks clarity

SEO is, in some ways, for the insane. It’s an absurd collection of technical tweaks, content thinking, link building and other little tactics that may or may not work. A novice gets exposed to one piece of crappy information after another, with an occasional bit of useful stuff mixed in. They create sites that repel search engines and piss off users. They get more awful advice. The cycle repeats. Every time it does, best practices get more muddled.

SEO lacks clarity. We can’t easily weigh the value of one change or tactic over another. But we can look at our changes and tactics in context. When we examine the potential of several changes or tactics before we flip the switch, we get a closer balance between algorithm-thinking and actual strategy.

Distance from perfect brings clarity to tactics and strategy

At some point you have to turn that knowledge into practice. You have to take action based on recommendations, your knowledge of SEO, and business considerations.

That’s hard when we can’t even agree on subdomains vs. subfolders.

I know subfolders work better. Sorry, couldn’t resist. Let the flaming comments commence.

To get clarity, take a deep breath and ask yourself:

“All other things being equal, will this change, tactic, or strategy move my site closer to perfect than my competitors?”

Breaking it down:

“Change, tactic, or strategy”

A change takes an existing component or policy and makes it something else. Replatforming is a massive change. Adding a new page is a smaller one. Adding ALT attributes to your images is another example. Changing the way your shopping cart works is yet another.

A tactic is a specific, executable practice. In SEO, that might be fixing broken links, optimizing ALT attributes, optimizing title tags or producing a specific piece of content.

A strategy is a broader decision that’ll cause change or drive tactics. A long-term content policy is the easiest example. Shifting away from asynchronous content and moving to server-generated content is another example.

“Perfect”

No one knows exactly what Google considers “perfect,” and “perfect” can’t really exist, but you can bet a perfect web page/site would have all of the following:

  1. Completely visible content that’s perfectly relevant to the audience and query
  2. A flawless user experience
  3. Instant load time
  4. Zero duplicate content
  5. Every page easily indexed and classified
  6. No mistakes, broken links, redirects or anything else generally yucky
  7. Zero reported problems or suggestions in each search engines’ webmaster tools, sorry, “Search Consoles”
  8. Complete authority through immaculate, organically-generated links

These 8 categories (and any of the other bazillion that probably exist) give you a way to break down “perfect” and help you focus on what’s really going to move you forward. These different areas may involve different facets of your organization.

Your IT team can work on load time and creating an error-free front- and back-end. Link building requires the time and effort of content and outreach teams.

Tactics for relevant, visible content and current best practices in UX are going to be more involved, requiring research and real study of your audience.

What you need and what resources you have are going to impact which tactics are most realistic for you.

But there’s a basic rule: If a website would make Googlebot swoon and present zero obstacles to users, it’s close to perfect.

“All other things being equal”

Assume every competing website is optimized exactly as well as yours.

Now ask: Will this [tactic, change or strategy] move you closer to perfect?

That’s the “all other things being equal” rule. And it’s an incredibly powerful rubric for evaluating potential changes before you act. Pretend you’re in a tie with your competitors. Will this one thing be the tiebreaker? Will it put you ahead? Or will it cause you to fall behind?

“Closer to perfect than my competitors”

Perfect is great, but unattainable. What you really need is to be just a little perfect-er.

Chasing perfect can be dangerous. Perfect is the enemy of the good (I love that quote. Hated Voltaire. But I love that quote). If you wait for the opportunity/resources to reach perfection, you’ll never do anything. And the only way to reduce distance from perfect is to execute.

Instead of aiming for pure perfection, aim for more perfect than your competitors. Beat them feature-by-feature, tactic-by-tactic. Implement strategy that supports long-term superiority.

Don’t slack off. But set priorities and measure your effort. If fixing server response codes will take one hour and fixing duplication will take ten, fix the response codes first. Both move you closer to perfect. Fixing response codes may not move the needle as much, but it’s a lot easier to do. Then move on to fixing duplicates.

Do the 60% that gets you a 90% improvement. Then move on to the next thing and do it again. When you’re done, get to work on that last 40%. Repeat as necessary.

Take advantage of quick wins. That gives you more time to focus on your bigger solutions.

Sites that are “fine” are pretty far from perfect

Google has lots of tweaks, tools and workarounds to help us mitigate sub-optimal sites:

  • Rel=canonical lets us guide Google past duplicate content rather than fix it
  • HTML snapshots let us reveal content that’s delivered using asynchronous content and JavaScript frameworks
  • We can use rel=next and prev to guide search bots through outrageously long pagination tunnels
  • And we can use rel=nofollow to hide spammy links and banners

Easy, right? All of these solutions may reduce distance from perfect (the search engines don’t guarantee it). But they don’t reduce it as much as fixing the problems.
Just fine does not equal fixed

The next time you set up rel=canonical, ask yourself:

“All other things being equal, will using rel=canonical to make up for duplication move my site closer to perfect than my competitors?”

Answer: Not if they’re using rel=canonical, too. You’re both using imperfect solutions that force search engines to crawl every page of your site, duplicates included. If you want to pass them on your way to perfect, you need to fix the duplicate content.

When you use Angular.js to deliver regular content pages, ask yourself:

“All other things being equal, will using HTML snapshots instead of actual, visible content move my site closer to perfect than my competitors?”

Answer: No. Just no. Not in your wildest, code-addled dreams. If I’m Google, which site will I prefer? The one that renders for me the same way it renders for users? Or the one that has to deliver two separate versions of every page?

When you spill banner ads all over your site, ask yourself…

You get the idea. Nofollow is better than follow, but banner pollution is still pretty dang far from perfect.

Mitigating SEO issues with search engine-specific tools is “fine.” But it’s far, far from perfect. If search engines are forced to choose, they’ll favor the site that just works.

Not just SEO

By the way, distance from perfect absolutely applies to other channels.

I’m focusing on SEO, but think of other Internet marketing disciplines. I hear stuff like “How fast should my site be?” (Faster than it is right now.) Or “I’ve heard you shouldn’t have any content below the fold.” (Maybe in 2001.) Or “I need background video on my home page!” (Why? Do you have a reason?) Or, my favorite: “What’s a good bounce rate?” (Zero is pretty awesome.)

And Internet marketing venues are working to measure distance from perfect. Pay-per-click marketing has the quality score: A codified financial reward applied for seeking distance from perfect in as many elements as possible of your advertising program.

Social media venues are aggressively building their own forms of graphing, scoring and ranking systems designed to separate the good from the bad.

Really, all marketing includes some measure of distance from perfect. But no channel is more influenced by it than SEO. Instead of arguing one rule at a time, ask yourself and your boss or client: Will this move us closer to perfect?

Hell, you might even please a customer or two.

One last note for all of the SEOs in the crowd. Before you start pointing out edge cases, consider this: We spend our days combing Google for embarrassing rankings issues. Every now and then, we find one, point, and start yelling “SEE! SEE!!!! THE GOOGLES MADE MISTAKES!!!!” Google’s got lots of issues. Screwing up the rankings isn’t one of them.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 2 years ago from tracking.feedpress.it

​​Measure Your Mobile Rankings and Search Visibility in Moz Analytics

Posted by jon.white

We have launched a couple of new things in Moz Pro that we are excited to share with you all: Mobile Rankings and a Search Visibility score. If you want, you can jump right in by heading to a campaign and adding a mobile engine, or keep reading for more details!

Track your mobile vs. desktop rankings in Moz Analytics

Mobilegeddon came and went with slightly less fanfare than expected, somewhat due to the vast ‘Mobile Friendly’ updates we all did at super short notice (nice work everyone!). Nevertheless, mobile rankings visibility is now firmly on everyone’s radar, and will only become more important over time.

Now you can track your campaigns’ mobile rankings for all of the same keywords and locations you are tracking on desktop.

For this campaign my mobile visibility is almost 20% lower than my desktop visibility and falling;
I can drill down to find out why

Clicking on this will take you into a new Engines tab within your Keyword Rankings page where you can find a more detailed version of this chart as well as a tabular view by keyword for both desktop and mobile. Here you can also filter by label and location.

Here I can see Search Visibility across engines including mobile;
in this case, for my branded keywords.

We have given an extra engine to all campaigns

We’ve given customers an extra engine for each campaign, increasing the number from 3 to 4. Use the extra slot to add the mobile engine and unlock your mobile data!

We will begin to track mobile rankings within 24 hours of adding to a campaign. Once you are set up, you will notice a new chart on your dashboard showing visibility for Desktop vs. Mobile Search Visibility.

Measure your Search Visibility score vs. competitors

The overall Search Visibility for my campaign

Along with this change we have also added a Search Visibility score to your rankings data. Use your visibility score to track and report on your overall campaign ranking performance, compare to your competitors, and look for any large shifts that might indicate penalties or algorithm changes. For a deeper drill-down into your data you can also segment your visibility score by keyword labels or locations. Visit the rankings summary page on any campaign to get started.

How is Search Visibility calculated?

Good question!

The Search Visibility score is the percentage of clicks we estimate you receive based on your rankings positions, across all of your keywords.

We take each ranking position for each keyword, multiply by an estimated click-thru-rate, and then take the average of all of your keywords. You can think of it as the percentage of your SERPs that you own. The score is expressed as a percentage, though scores of 100% would be almost impossible unless you are tracking keywords using the “site:” modifier. It is probably more useful to measure yourself vs. your competitors rather than focus on the actual score, but, as a rule of thumb, mid-40s is probably the realistic maximum for non-branded keywords.

Jeremy, our Moz Analytics TPM, came up with this metaphor:

Think of the SERPs for your keywords as villages. Each position on the SERP is a plot of land in SERP-village. The Search Visibility score is the average amount of plots you own in each SERP-village. Prime real estate plots (i.e., better ranking positions, like #1) are worth more. A complete monopoly of real estate in SERP-village would equate to a score of 100%. The Search Visibility score equates to how much total land you own in all SERP-villages.

Some neat ways to use this feature

  • Label and group your keywords, particularly when you add them – As visibility score is an average of all of your keywords, when you add or remove keywords from your campaign you will likely see fluctuations in the score that are unrelated to performance. Solve this by getting in the habit of labeling keywords when you add them. Then segment your data by these labels to track performance of specific keyword groups over time.
  • See how location affects your mobile rankings – Using the Engines tab in Keyword Rankings, use the filters to select just local keywords. Look for big differences between Mobile and Desktop where Google might be assuming local intent for mobile searches but not for desktop. Check out how your competitors perform for these keywords. Can you use this data?

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 2 years ago from tracking.feedpress.it

​The 2015 Online Marketing Industry Survey

Posted by Dr-Pete

It’s been another wild year in search marketing. Mobilegeddon crushed our Twitter streams, but not our dreams, and Matt Cutts stepped out of the spotlight to make way for an uncertain Google future. Pandas and Penguins continue to torment us, but most days, like anyone else, we were just trying to get the job done and earn a living.

This year, over 3,600 brave souls, each one more intelligent and good-looking than the last, completed our survey. While the last survey was technically “2014”, we collected data for it in late 2013, so the 2015 survey reflects about 18 months of industry changes.

A few highlights

Let’s dig in. Almost half (49%) of our 2015 respondents involved in search marketing were in-house marketers. In-house teams still tend to be small – 71% of our in-house marketers reported only 1-3 people in their company being involved in search marketing at least quarter-time. These teams do have substantial influence, though, with 86% reporting that they were involved in purchasing decisions.

Agency search marketers reported larger teams and more diverse responsibilities. More than one-third (36%) of agency marketers in our survey reported working with more than 20 clients in the previous year. Agencies covered a wide range of services, with the top 5 being:

More than four-fifths (81%) of agency respondents reported providing both SEO and SEM services for clients. Please note that respondents could select more than one service/tool/etc., so the charts in this post will not add up to 100%.

The vast majority of respondents (85%) reported being directly involved with content marketing, which was on par with 2014. Nearly two-thirds (66%) of agency content marketers reported “Content for SEO purposes” as their top activity, although “Building Content Strategy” came in a solid second at 44% of respondents.

Top tools

Where do we get such wonderful toys? We marketers love our tools, so let’s take a look at the Top 10 tools across a range of categories. Please note that this survey was conducted here on Moz, and our audience certainly has a pro-Moz slant.

Up first, here are the Top 10 SEO tools in our survey:

Just like last time, Google Webmaster Tools (now “Search Console”) leads the way. Moz Pro and Majestic slipped a little bit, and Firebug fell out of the Top 10. The core players remained fairly stable.

Here are the Top 10 Content tools in our survey:

Even with its uncertain future, Google Alerts continues to be widely used. There are a lot of newcomers to the content tools world, so year-over-year comparisons are tricky. Expect even more players in this market in the coming year.

Following are our respondents’ Top 10 analytics tools:

For an industry that complains about Google so much, we sure do seem to love their stuff. Google Analytics dominates, crushing the enterprise players, at least in the mid-market. KISSmetrics gained solid ground (from the #10 spot last time), while home-brewed tools slipped a bit. CrazyEgg and WordPress Stats remain very popular since our last survey.

Finally, here are the Top 10 social tools used by our respondents:

Facebook Insights and Hootsuite retained the top spots from last year, but newcomer Twitter Analytics rocketed into the #3 position. LinkedIn Insights emerged as a strong contender, too. Overall usage of all social tools increased. Tweetdeck held the #6 spot in 2014, with 19% usage, but dropped to #10 this year, even bumping up slightly to 20%.

Of course, digging into social tools naturally begs the question of which social networks are at the top of our lists.

The Top 6 are unchanged since our last survey, and it’s clear that the barriers to entry to compete with the big social networks are only getting higher. Instagram doubled its usage (from 11% of respondents last time), but this still wasn’t enough to overtake Pinterest. Reddit and Quora saw steady growth, and StumbleUpon slipped out of the Top 10.

Top activities

So, what exactly do we do with these tools and all of our time? Across all online marketers in our survey, the Top 5 activities were:

For in-house marketers, “Site Audits” dropped to the #6 position and “Brand Strategy” jumped up to the #3 spot. Naturally, in-house marketers have more resources to focus on strategy.

For agencies and consultants, “Site Audits” bumped up to #2, and “Managing People” pushed down social media to take the #5 position. Larger agency teams require more traditional people wrangling.

Here’s a much more detailed breakdown of how we spend our time in 2015:

In terms of overall demand for services, the Top 5 winners (calculated by % reporting increase – % reporting decrease were):

Demand for CRO is growing at a steady clip, but analytics still leads the way. Both “Content Creation” (#2) and “Content Curation” (#6) showed solid demand increases.

Some categories reported both gains and losses – 30% of respondents reported increased demand for “Link Building”, while 20% reported decreased demand. Similarly, 20% reported increased demand for “Link Removal”, while almost as many (17%) reported decreased demand. This may be a result of overall demand shifts, or it may represent more specialization by agencies and consultants.

What’s in store for 2016?

It’s clear that our job as online marketers is becoming more diverse, more challenging, and more strategic. We have to have a command of a wide array of tools and tactics, and that’s not going to slow down any time soon. On the bright side, companies are more aware of what we do, and they’re more willing to spend the money to have it done. Our evolution has barely begun as an industry, and you can expect more changes and growth in the coming year.

Raw data download

If you’d like to take a look through the raw results from this year’s survey (we’ve removed identifying information like email addresses from all responses), we’ve got that for you here:

Download the raw results

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 2 years ago from tracking.feedpress.it