The Linkbait Bump: How Viral Content Creates Long-Term Lift in Organic Traffic – Whiteboard Friday

Posted by randfish

A single fantastic (or “10x”) piece of content can lift a site’s traffic curves long beyond the popularity of that one piece. In today’s Whiteboard Friday, Rand talks about why those curves settle into a “new normal,” and how you can go about creating the content that drives that change.

For reference, here’s a still of this week’s whiteboard. Click on it to open a high resolution image in a new tab!

Video Transcription

Howdy, Moz fans, and welcome to another edition of Whiteboard Friday. This week we’re chatting about the linkbait bump, classic phrase in the SEO world and almost a little dated. I think today we’re talking a little bit more about viral content and how high-quality content, content that really is the cornerstone of a brand or a website’s content can be an incredible and powerful driver of traffic, not just when it initially launches but over time.

So let’s take a look.

This is a classic linkbait bump, viral content bump analytics chart. I’m seeing over here my traffic and over here the different months of the year. You know, January, February, March, like I’m under a thousand. Maybe I’m at 500 visits or something, and then I have this big piece of viral content. It performs outstandingly well from a relative standpoint for my site. It gets 10,000 or more visits, drives a ton more people to my site, and then what happens is that that traffic falls back down. But the new normal down here, new normal is higher than the old normal was. So the new normal might be at 1,000, 1,500 or 2,000 visits whereas before I was at 500.

Why does this happen?

A lot of folks see an analytics chart like this, see examples of content that’s done this for websites, and they want to know: Why does this happen and how can I replicate that effect? The reasons why are it sort of feeds back into that viral loop or the flywheel, which we’ve talked about in previous Whiteboard Fridays, where essentially you start with a piece of content. That content does well, and then you have things like more social followers on your brand’s accounts. So now next time you go to amplify content or share content socially, you’re reaching more potential people. You have a bigger audience. You have more people who share your content because they’ve seen that that content performs well for them in social. So they want to find other content from you that might help their social accounts perform well.

You see more RSS and email subscribers because people see your interesting content and go, “Hey, I want to see when these guys produce something else.” You see more branded search traffic because people are looking specifically for content from you, not necessarily just around this viral piece, although that’s often a big part of it, but around other pieces as well, especially if you do a good job of exposing them to that additional content. You get more bookmark and type in traffic, more searchers biased by personalization because they’ve already visited your site. So now when they search and they’re logged into their accounts, they’re going to see your site ranking higher than they normally would otherwise, and you get an organic SEO lift from all the links and shares and engagement.

So there’s a ton of different factors that feed into this, and you kind of want to hit all of these things. If you have a piece of content that gets a lot of shares, a lot of links, but then doesn’t promote engagement, doesn’t get more people signing up, doesn’t get more people searching for your brand or searching for that content specifically, then it’s not going to have the same impact. Your traffic might fall further and more quickly.

How do you achieve this?

How do we get content that’s going to do this? Well, we’re going to talk through a number of things that we’ve talked about previously on Whiteboard Friday. But there are some additional ones as well. This isn’t just creating good content or creating high quality content, it’s creating a particular kind of content. So for this what you want is a deep understanding, not necessarily of what your standard users or standard customers are interested in, but a deep understanding of what influencers in your niche will share and promote and why they do that.

This often means that you follow a lot of sharers and influencers in your field, and you understand, hey, they’re all sharing X piece of content. Why? Oh, because it does this, because it makes them look good, because it helps their authority in the field, because it provides a lot of value to their followers, because they know it’s going to get a lot of retweets and shares and traffic. Whatever that because is, you have to have a deep understanding of it in order to have success with viral kinds of content.

Next, you want to have empathy for users and what will give them the best possible experience. So if you know, for example, that a lot of people are coming on mobile and are going to be sharing on mobile, which is true of almost all viral content today, FYI, you need to be providing a great mobile and desktop experience. Oftentimes that mobile experience has to be different, not just responsive design, but actually a different format, a different way of being able to scroll through or watch or see or experience that content.

There are some good examples out there of content that does that. It makes a very different user experience based on the browser or the device you’re using.

You also need to be aware of what will turn them off. So promotional messages, pop-ups, trying to sell to them, oftentimes that diminishes user experience. It means that content that could have been more viral, that could have gotten more shares won’t.

Unique value and attributes that separate your content from everything else in the field. So if there’s like ABCD and whoa, what’s that? That’s very unique. That stands out from the crowd. That provides a different form of value in a different way than what everyone else is doing. That uniqueness is often a big reason why content spreads virally, why it gets more shared than just the normal stuff.

I’ve talk about this a number of times, but content that’s 10X better than what the competition provides. So unique value from the competition, but also quality that is not just a step up, but 10X better, massively, massively better than what else you can get out there. That makes it unique enough. That makes it stand out from the crowd, and that’s a very hard thing to do, but that’s why this is so rare and so valuable.

This is a critical one, and I think one that, I’ll just say, many organizations fail at. That is the freedom and support to fail many times, to try to create these types of effects, to have this impact many times before you hit on a success. A lot of managers and clients and teams and execs just don’t give marketing teams and content teams the freedom to say, “Yeah, you know what? You spent a month and developer resources and designer resources and spent some money to go do some research and contracted with this third party, and it wasn’t a hit. It didn’t work. We didn’t get the viral content bump. It just kind of did okay. You know what? We believe in you. You’ve got a lot of chances. You should try this another 9 or 10 times before we throw it out. We really want to have a success here.”

That is something that very few teams invest in. The powerful thing is because so few people are willing to invest that way, the ones that do, the ones that believe in this, the ones that invest long term, the ones that are willing to take those failures are going to have a much better shot at success, and they can stand out from the crowd. They can get these bumps. It’s powerful.

Not a requirement, but it really, really helps to have a strong engaged community, either on your site and around your brand, or at least in your niche and your topic area that will help, that wants to see you, your brand, your content succeed. If you’re in a space that has no community, I would work on building one, even if it’s very small. We’re not talking about building a community of thousands or tens of thousands. A community of 100 people, a community of 50 people even can be powerful enough to help content get that catalyst, that first bump that’ll boost it into viral potential.

Then finally, for this type of content, you need to have a logical and not overly promotional match between your brand and the content itself. You can see many sites in what I call sketchy niches. So like a criminal law site or a casino site or a pharmaceutical site that’s offering like an interactive musical experience widget, and you’re like, “Why in the world is this brand promoting this content? Why did they even make it? How does that match up with what they do? Oh, it’s clearly just intentionally promotional.”

Look, many of these brands go out there and they say, “Hey, the average web user doesn’t know and doesn’t care.” I agree. But the average web user is not an influencer. Influencers know. Well, they’re very, very suspicious of why content is being produced and promoted, and they’re very skeptical of promoting content that they don’t think is altruistic. So this kills a lot of content for brands that try and invest in it when there’s no match. So I think you really need that.

Now, when you do these linkbait bump kinds of things, I would strongly recommend that you follow up, that you consider the quality of the content that you’re producing. Thereafter, that you invest in reproducing these resources, keeping those resources updated, and that you don’t simply give up on content production after this. However, if you’re a small business site, a small or medium business, you might think about only doing one or two of these a year. If you are a heavy content player, you’re doing a lot of content marketing, content marketing is how you’re investing in web traffic, I’d probably be considering these weekly or monthly at the least.

All right, everyone. Look forward to your experiences with the linkbait bump, and I will see you again next week for another edition of Whiteboard Friday. Take care.

Video transcription by Speechpad.com

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

[ccw-atrib-link]

INTERACTIVE: Pinterest and Instagram – what works, what doesn’t?

  What are the most talked about topics on Pinterest? How popular are cat pictures on Instagram? Are cat pictures more popular on Instagram than on Pinterest? At Labs.Majestic we built Round The Clock – an interactive tool that lets you take a closer look at Topical Trust Flow data for a website of your…

The post INTERACTIVE: Pinterest and Instagram – what works, what doesn’t? appeared first on Majestic Blog.

[ccw-atrib-link]

From Editorial Calendars to SEO: Setting Yourself Up to Create Fabulous Content

Posted by Isla_McKetta

Quick note: This article is meant to apply to teams of all sizes, from the sole proprietor who spends all night writing their copy (because they’re doing business during the day) to the copy team who occupies an entire floor and produces thousands of pieces of content per week. So if you run into a section that you feel requires more resources than you can devote just now, that’s okay. Bookmark it and revisit when you can, or scale the step down to a more appropriate size for your team. We believe all the information here is important, but that does not mean you have to do everything right now.

If you thought ideation was fun, get ready for content creation. Sure, we’ve all written some things before, but the creation phase of content marketing is where you get to watch that beloved idea start to take shape.

Before you start creating, though, you want to get (at least a little) organized, and an editorial calendar is the perfect first step.

Editorial calendars

Creativity and organization are not mutually exclusive. In fact, they can feed each other. A solid schedule gives you and your writers the time and space to be wild and creative. If you’re just starting out, this document may be sparse, but it’s no less important. Starting early with your editorial calendar also saves you from creating content willy-nilly and then finding out months later that no one ever finished that pesky (but crucial) “About” page.

There’s no wrong way to set up your editorial calendar, as long as it’s meeting your needs. Remember that an editorial calendar is a living document, and it will need to change as a hot topic comes up or an author drops out.

There are a lot of different types of documents that pass for editorial calendars. You get to pick the one that’s right for your team. The simplest version is a straight-up calendar with post titles written out on each day. You could even use a wall calendar and a Sharpie.

Monday Tuesday Wednesday Thursday Friday
Title
The Five Colors of Oscar Fashion 12 Fabrics We’re Watching for Fall Is Charmeuse the New Corduroy? Hot Right Now: Matching Your Handbag to Your Hatpin Tea-length and Other Fab Vocab You Need to Know
Author Ellie James Marta Laila Alex

Teams who are balancing content for different brands at agencies or other more complex content environments will want to add categories, author information, content type, social promo, and more to their calendars.

Truly complex editorial calendars are more like hybrid content creation/editorial calendars, where each of the steps to create and publish the content are indicated and someone has planned for how long all of that takes. These can be very helpful if the content you’re responsible for crosses a lot of teams and can take a long time to complete. It doesn’t matter if you’re using Excel or a Google Doc, as long as the people who need the calendar can easily access it. Gantt charts can be excellent for this. Here’s a favorite template for creating a Gantt chart in Google Docs (and they only get more sophisticated).

Complex calendars can encompass everything from ideation through writing, legal review, and publishing. You might even add content localization if your empire spans more than one continent to make sure you have the currency, date formatting, and even slang right.

Content governance

Governance outlines who is taking responsibility for your content. Who evaluates your content performance? What about freshness? Who decides to update (or kill) an older post? Who designs and optimizes workflows for your team or chooses and manages your CMS?

All these individual concerns fall into two overarching components to governance: daily maintenance and overall strategy. In the long run it helps if one person has oversight of the whole process, but the smaller steps can easily be split among many team members. Read this to take your governance to the next level.

Finding authors

The scale of your writing enterprise doesn’t have to be limited to the number of authors you have on your team. It’s also important to consider the possibility of working with freelancers and guest authors. Here’s a look at the pros and cons of outsourced versus in-house talent.

In-house authors

Guest authors and freelancers

Responsible to

You

Themselves

Paid by

You (as part of their salary)

You (on a per-piece basis)

Subject matter expertise

Broad but shallow

Deep but narrow

Capacity for extra work

As you wish

Show me the Benjamins

Turnaround time

On a dime

Varies

Communication investment

Less

More

Devoted audience

Smaller

Potentially huge

From that table, it might look like in-house authors have a lot more advantages. That’s somewhat true, but do not underestimate the value of occasionally working with a true industry expert who has name recognition and a huge following. Whichever route you take (and there are plenty of hybrid options), it’s always okay to ask that the writers you are working with be professional about communication, payment, and deadlines. In some industries, guest writers will write for links. Consider yourself lucky if that’s true. Remember, though, that the final paycheck can be great leverage for getting a writer to do exactly what you need them to (such as making their deadlines).

Tools to help with content creation

So those are some things you need to have in place before you create content. Now’s the fun part: getting started. One of the beautiful things about the Internet is that new and exciting tools crop up every day to help make our jobs easier and more efficient. Here are a few of our favorites.

Calendars

You can always use Excel or a Google Doc to set up your editorial calendar, but we really like Trello for the ability to gather a lot of information in one card and then drag and drop it into place. Once there are actual dates attached to your content, you might be happier with something like a Google Calendar.

Ideation and research

If you need a quick fix for ideation, turn your keywords into wacky ideas with Portent’s Title Maker. You probably won’t want to write to the exact title you’re given (although “True Facts about Justin Bieber’s Love of Pickles” does sound pretty fascinating…), but it’s a good way to get loose and look at your topic from a new angle.

Once you’ve got that idea solidified, find out what your audience thinks about it by gathering information with Survey Monkey or your favorite survey tool. Or, use Storify to listen to what people are saying about your topic across a wide variety of platforms. You can also use Storify to save those references and turn them into a piece of content or an illustration for one. Don’t forget that a simple social ask can also do wonders.

Format

Content doesn’t have to be all about the words. Screencasts, Google+ Hangouts, and presentations are all interesting ways to approach content. Remember that not everyone’s a reader. Some of your audience will be more interested in visual or interactive content. Make something for everyone.

Illustration

Don’t forget to make your content pretty. It’s not that hard to find free stock images online (just make sure you aren’t violating someone’s copyright). We like Morgue File, Free Images, and Flickr’s Creative Commons. If you aren’t into stock images and don’t have access to in-house graphic design, it’s still relatively easy to add images to your content. Pull a screenshot with Skitch or dress up an existing image with Pixlr. You can also use something like Canva to create custom graphics.

Don’t stop with static graphics, though. There are so many tools out there to help you create gifs, quizzes and polls, maps, and even interactive timelines. Dream it, then search for it. Chances are whatever you’re thinking of is doable.

Quality, not quantity

Mediocre content will hurt your cause

Less is more. That’s not an excuse to pare your blog down to one post per month (check out our publishing cadence experiment), but it is an important reminder that if you’re writing “How to Properly Install a Toilet Seat” two days after publishing “Toilet Seat Installation for Dummies,” you might want to rethink your strategy.

The thing is, and I’m going to use another cliché here to drive home the point, you never get a second chance to make a first impression. Potential customers are roving the Internet right now looking for exactly what you’re selling. And if what they find is an only somewhat informative article stuffed with keywords and awful spelling and grammar mistakes… well, you don’t want that. Oh, and search engines think it’s spammy too…

A word about copyright

We’re not copyright lawyers, so we can’t give you the ins and outs on all the technicalities. What we can tell you (and you already know this) is that it’s not okay to steal someone else’s work. You wouldn’t want them to do it to you. This includes images. So whenever you can, make your own images or find images that you can either purchase the rights to (stock imagery) or license under Creative Commons.

It’s usually okay to quote short portions of text, as long as you attribute the original source (and a link is nice). In general, titles and ideas can’t be copyrighted (though they might be trademarked or patented). When in doubt, asking for permission is smart.

That said, part of the fun of the Internet is the remixing culture which includes using things like memes and gifs. Just know that if you go that route, there is a certain amount of risk involved.

Editing

Your content needs to go through at least one editing cycle by someone other than the original author. There are two types of editing, developmental (which looks at the underlying structure of a piece that happens earlier in the writing cycle) and copy editing (which makes sure all the words are there and spelled right in the final draft).

If you have a very small team or are in a rush (and are working with writers that have some skill), you can often skip the developmental editing phase. But know that an investment in that close read of an early draft is often beneficial to the piece and to the writer’s overall growth.

Many content teams peer-edit work, which can be great. Other organizations prefer to run their work by a dedicated editor. There’s no wrong answer, as long as the work gets edited.

Ensuring proper basic SEO

The good news is that search engines are doing their best to get closer and closer to understanding and processing natural language. So good writing (including the natural use of synonyms rather than repeating those keywords over and over and…) will take you a long way towards SEO mastery.

For that reason (and because it’s easy to get trapped in keyword thinking and veer into keyword stuffing), it’s often nice to think of your SEO check as a further edit of the post rather than something you should think about as you’re writing.

But there are still a few things you can do to help cover those SEO bets. Once you have that draft, do a pass for SEO to make sure you’ve covered the following:

  • Use your keyword in your title
  • Use your keyword (or long-tail keyword phrase) in an H2
  • Make sure the keyword appears at least once (though not more than four times, especially if it’s a phrase) in the body of the post
  • Use image alt text (including the keyword when appropriate)

Finding time to write when you don’t have any

Writing (assuming you’re the one doing the writing) can require a lot of energy—especially if you want to do it well. The best way to find time to write is to break each project down into little tasks. For example, writing a blog post actually breaks down into these steps (though not always in this order):

  • Research
  • Outline
  • Fill in outline
  • Rewrite and finish post
  • Write headline
  • SEO check
  • Final edit
  • Select hero image (optional)

So if you only have random chunks of time, set aside 15-30 minutes one day (when your research is complete) to write a really great outline. Then find an hour the next to fill that outline in. After an additional hour the following day, (unless you’re dealing with a research-heavy post) you should have a solid draft by the end of day three.

The magic of working this way is that you engage your brain and then give it time to work in the background while you accomplish other tasks. Hemingway used to stop mid-sentence at the end of his writing days for the same reason.

Once you have that draft nailed, the rest of the steps are relatively easy (even the headline, which often takes longer to write than any other sentence, is easier after you’ve immersed yourself in the post over a few days).

Working with design/development

Every designer and developer is a little different, so we can’t give you any blanket cure-alls for inter-departmental workarounds (aka “smashing silos”). But here are some suggestions to help you convey your vision while capitalizing on the expertise of your coworkers to make your content truly excellent.

Ask for feedback

From the initial brainstorm to general questions about how to work together, asking your team members what they think and prefer can go a long way. Communicate all the details you have (especially the unspoken expectations) and then listen.

If your designer tells you up front that your color scheme is years out of date, you’re saving time. And if your developer tells you that the interactive version of that timeline will require four times the resources, you have the info you need to fight for more budget (or reassess the project).

Check in

Things change in the design and development process. If you have interim check-ins already set up with everyone who’s working on the project, you’ll avoid the potential for nasty surprises at the end. Like finding out that no one has experience working with that hot new coding language you just read about and they’re trying to do a workaround that isn’t working.

Proofread

Your job isn’t done when you hand over the copy to your designer or developer. Not only might they need help rewriting some of your text so that it fits in certain areas, they will also need you to proofread the final version. Accidents happen in the copy-and-paste process and there’s nothing sadder than a really beautiful (and expensive) piece of content that wraps up with a typo:

Know when to fight for an idea

Conflict isn’t fun, but sometimes it’s necessary. The more people involved in your content, the more watered down the original idea can get and the more roadblocks and conflicting ideas you’ll run into. Some of that is very useful. But sometimes you’ll get pulled off track. Always remember who owns the final product (this may not be you) and be ready to stand up for the idea if it’s starting to get off track.

We’re confident this list will set you on the right path to creating some really awesome content, but is there more you’d like to know? Ask us your questions in the comments.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

[ccw-atrib-link]

New Hubs of Authority Chart in Majestic brings Data to Life

Today Majestic is proud to bring an interactive “Sankey” chart into both the Clique Hunter tools and an interactive Word Cloud into the Anchor Text tab of Site Explorer. These visualizations bring data to life and I was especially impressed when I saw the new Clique Hunter visualization because you can click on elements to…

The post New Hubs of Authority Chart in Majestic brings Data to Life appeared first on Majestic Blog.

[ccw-atrib-link]

Should I Use Relative or Absolute URLs? – Whiteboard Friday

Posted by RuthBurrReedy

It was once commonplace for developers to code relative URLs into a site. There are a number of reasons why that might not be the best idea for SEO, and in today’s Whiteboard Friday, Ruth Burr Reedy is here to tell you all about why.

For reference, here’s a still of this week’s whiteboard. Click on it to open a high resolution image in a new tab!

Let’s discuss some non-philosophical absolutes and relatives

Howdy, Moz fans. My name is Ruth Burr Reedy. You may recognize me from such projects as when I used to be the Head of SEO at Moz. I’m now the Senior SEO Manager at BigWing Interactive in Oklahoma City. Today we’re going to talk about relative versus absolute URLs and why they are important.

At any given time, your website can have several different configurations that might be causing duplicate content issues. You could have just a standard http://www.example.com. That’s a pretty standard format for a website.

But the main sources that we see of domain level duplicate content are when the non-www.example.com does not redirect to the www or vice-versa, and when the HTTPS versions of your URLs are not forced to resolve to HTTP versions or, again, vice-versa. What this can mean is if all of these scenarios are true, if all four of these URLs resolve without being forced to resolve to a canonical version, you can, in essence, have four versions of your website out on the Internet. This may or may not be a problem.

It’s not ideal for a couple of reasons. Number one, duplicate content is a problem because some people think that duplicate content is going to give you a penalty. Duplicate content is not going to get your website penalized in the same way that you might see a spammy link penalty from Penguin. There’s no actual penalty involved. You won’t be punished for having duplicate content.

The problem with duplicate content is that you’re basically relying on Google to figure out what the real version of your website is. Google is seeing the URL from all four versions of your website. They’re going to try to figure out which URL is the real URL and just rank that one. The problem with that is you’re basically leaving that decision up to Google when it’s something that you could take control of for yourself.

There are a couple of other reasons that we’ll go into a little bit later for why duplicate content can be a problem. But in short, duplicate content is no good.

However, just having these URLs not resolve to each other may or may not be a huge problem. When it really becomes a serious issue is when that problem is combined with injudicious use of relative URLs in internal links. So let’s talk a little bit about the difference between a relative URL and an absolute URL when it comes to internal linking.

With an absolute URL, you are putting the entire web address of the page that you are linking to in the link. You’re putting your full domain, everything in the link, including /page. That’s an absolute URL.

However, when coding a website, it’s a fairly common web development practice to instead code internal links with what’s called a relative URL. A relative URL is just /page. Basically what that does is it relies on your browser to understand, “Okay, this link is pointing to a page that’s on the same domain that we’re already on. I’m just going to assume that that is the case and go there.”

There are a couple of really good reasons to code relative URLs

1) It is much easier and faster to code.

When you are a web developer and you’re building a site and there thousands of pages, coding relative versus absolute URLs is a way to be more efficient. You’ll see it happen a lot.

2) Staging environments

Another reason why you might see relative versus absolute URLs is some content management systems — and SharePoint is a great example of this — have a staging environment that’s on its own domain. Instead of being example.com, it will be examplestaging.com. The entire website will basically be replicated on that staging domain. Having relative versus absolute URLs means that the same website can exist on staging and on production, or the live accessible version of your website, without having to go back in and recode all of those URLs. Again, it’s more efficient for your web development team. Those are really perfectly valid reasons to do those things. So don’t yell at your web dev team if they’ve coded relative URLS, because from their perspective it is a better solution.

Relative URLs will also cause your page to load slightly faster. However, in my experience, the SEO benefits of having absolute versus relative URLs in your website far outweigh the teeny-tiny bit longer that it will take the page to load. It’s very negligible. If you have a really, really long page load time, there’s going to be a whole boatload of things that you can change that will make a bigger difference than coding your URLs as relative versus absolute.

Page load time, in my opinion, not a concern here. However, it is something that your web dev team may bring up with you when you try to address with them the fact that, from an SEO perspective, coding your website with relative versus absolute URLs, especially in the nav, is not a good solution.

There are even better reasons to use absolute URLs

1) Scrapers

If you have all of your internal links as relative URLs, it would be very, very, very easy for a scraper to simply scrape your whole website and put it up on a new domain, and the whole website would just work. That sucks for you, and it’s great for that scraper. But unless you are out there doing public services for scrapers, for some reason, that’s probably not something that you want happening with your beautiful, hardworking, handcrafted website. That’s one reason. There is a scraper risk.

2) Preventing duplicate content issues

But the other reason why it’s very important to have absolute versus relative URLs is that it really mitigates the duplicate content risk that can be presented when you don’t have all of these versions of your website resolving to one version. Google could potentially enter your site on any one of these four pages, which they’re the same page to you. They’re four different pages to Google. They’re the same domain to you. They are four different domains to Google.

But they could enter your site, and if all of your URLs are relative, they can then crawl and index your entire domain using whatever format these are. Whereas if you have absolute links coded, even if Google enters your site on www. and that resolves, once they crawl to another page, that you’ve got coded without the www., all of that other internal link juice and all of the other pages on your website, Google is not going to assume that those live at the www. version. That really cuts down on different versions of each page of your website. If you have relative URLs throughout, you basically have four different websites if you haven’t fixed this problem.

Again, it’s not always a huge issue. Duplicate content, it’s not ideal. However, Google has gotten pretty good at figuring out what the real version of your website is.

You do want to think about internal linking, when you’re thinking about this. If you have basically four different versions of any URL that anybody could just copy and paste when they want to link to you or when they want to share something that you’ve built, you’re diluting your internal links by four, which is not great. You basically would have to build four times as many links in order to get the same authority. So that’s one reason.

3) Crawl Budget

The other reason why it’s pretty important not to do is because of crawl budget. I’m going to point it out like this instead.

When we talk about crawl budget, basically what that is, is every time Google crawls your website, there is a finite depth that they will. There’s a finite number of URLs that they will crawl and then they decide, “Okay, I’m done.” That’s based on a few different things. Your site authority is one of them. Your actual PageRank, not toolbar PageRank, but how good Google actually thinks your website is, is a big part of that. But also how complex your site is, how often it’s updated, things like that are also going to contribute to how often and how deep Google is going to crawl your site.

It’s important to remember when we think about crawl budget that, for Google, crawl budget cost actual dollars. One of Google’s biggest expenditures as a company is the money and the bandwidth it takes to crawl and index the Web. All of that energy that’s going into crawling and indexing the Web, that lives on servers. That bandwidth comes from servers, and that means that using bandwidth cost Google actual real dollars.

So Google is incentivized to crawl as efficiently as possible, because when they crawl inefficiently, it cost them money. If your site is not efficient to crawl, Google is going to save itself some money by crawling it less frequently and crawling to a fewer number of pages per crawl. That can mean that if you have a site that’s updated frequently, your site may not be updating in the index as frequently as you’re updating it. It may also mean that Google, while it’s crawling and indexing, may be crawling and indexing a version of your website that isn’t the version that you really want it to crawl and index.

So having four different versions of your website, all of which are completely crawlable to the last page, because you’ve got relative URLs and you haven’t fixed this duplicate content problem, means that Google has to spend four times as much money in order to really crawl and understand your website. Over time they’re going to do that less and less frequently, especially if you don’t have a really high authority website. If you’re a small website, if you’re just starting out, if you’ve only got a medium number of inbound links, over time you’re going to see your crawl rate and frequency impacted, and that’s bad. We don’t want that. We want Google to come back all the time, see all our pages. They’re beautiful. Put them up in the index. Rank them well. That’s what we want. So that’s what we should do.

There are couple of ways to fix your relative versus absolute URLs problem

1) Fix what is happening on the server side of your website

You have to make sure that you are forcing all of these different versions of your domain to resolve to one version of your domain. For me, I’m pretty agnostic as to which version you pick. You should probably already have a pretty good idea of which version of your website is the real version, whether that’s www, non-www, HTTPS, or HTTP. From my view, what’s most important is that all four of these versions resolve to one version.

From an SEO standpoint, there is evidence to suggest and Google has certainly said that HTTPS is a little bit better than HTTP. From a URL length perspective, I like to not have the www. in there because it doesn’t really do anything. It just makes your URLs four characters longer. If you don’t know which one to pick, I would pick one this one HTTPS, no W’s. But whichever one you pick, what’s really most important is that all of them resolve to one version. You can do that on the server side, and that’s usually pretty easy for your dev team to fix once you tell them that it needs to happen.

2) Fix your internal links

Great. So you fixed it on your server side. Now you need to fix your internal links, and you need to recode them for being relative to being absolute. This is something that your dev team is not going to want to do because it is time consuming and, from a web dev perspective, not that important. However, you should use resources like this Whiteboard Friday to explain to them, from an SEO perspective, both from the scraper risk and from a duplicate content standpoint, having those absolute URLs is a high priority and something that should get done.

You’ll need to fix those, especially in your navigational elements. But once you’ve got your nav fixed, also pull out your database or run a Screaming Frog crawl or however you want to discover internal links that aren’t part of your nav, and make sure you’re updating those to be absolute as well.

Then you’ll do some education with everybody who touches your website saying, “Hey, when you link internally, make sure you’re using the absolute URL and make sure it’s in our preferred format,” because that’s really going to give you the most bang for your buck per internal link. So do some education. Fix your internal links.

Sometimes your dev team going to say, “No, we can’t do that. We’re not going to recode the whole nav. It’s not a good use of our time,” and sometimes they are right. The dev team has more important things to do. That’s okay.

3) Canonicalize it!

If you can’t get your internal links fixed or if they’re not going to get fixed anytime in the near future, a stopgap or a Band-Aid that you can kind of put on this problem is to canonicalize all of your pages. As you’re changing your server to force all of these different versions of your domain to resolve to one, at the same time you should be implementing the canonical tag on all of the pages of your website to self-canonize. On every page, you have a canonical page tag saying, “This page right here that they were already on is the canonical version of this page. ” Or if there’s another page that’s the canonical version, then obviously you point to that instead.

But having each page self-canonicalize will mitigate both the risk of duplicate content internally and some of the risk posed by scrappers, because when they scrape, if they are scraping your website and slapping it up somewhere else, those canonical tags will often stay in place, and that lets Google know this is not the real version of the website.

In conclusion, relative links, not as good. Absolute links, those are the way to go. Make sure that you’re fixing these very common domain level duplicate content problems. If your dev team tries to tell you that they don’t want to do this, just tell them I sent you. Thanks guys.

Video transcription by Speechpad.com

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

[ccw-atrib-link]

Misuses of 4 Google Analytics Metrics Debunked

Posted by Tom.Capper

In this post I’ll pull apart four of the most commonly used metrics in Google Analytics, how they are collected, and why they are so easily misinterpreted.

Average Time on Page

Average time on page should be a really useful metric, particularly if you’re interested in engagement with content that’s all on a single page. Unfortunately, this is actually its worst use case. To understand why, you need to understand how time on page is calculated in Google Analytics:

Time on Page: Total across all pageviews of time from pageview to last engagement hit on that page (where an engagement hit is any of: next pageview, interactive event, e-commerce transaction, e-commerce item hit, or social plugin). (Source)

If there is no subsequent engagement hit, or if there is a gap between the last engagement hit on a site and leaving the site, the assumption is that no further time was spent on the site. Below are some scenarios with an intuitive time on page of 20 seconds, and their Google Analytics time on page:

Scenario

Intuitive time on page

GA time on page

0s: Pageview
10s: Social plugin
20s: Click through to next page

20s

20s

0s: Pageview
10s: Social plugin
20s: Leave site

20s

10s

0s: Pageview
20s: Leave site

20s

0s

Google doesn’t want exits to influence the average time on page, because of scenarios like the third example above, where they have a time on page of 0 seconds (source). To avoid this, they use the following formula (remember that Time on Page is a total):

Average Time on Page: (Time on Page) / (Pageviews – Exits)

However, as the second example above shows, this assumption doesn’t always hold. The second example feeds into the top half of the average time on page faction, but not the bottom half:

Example 2 Average Time on Page: (20s+10s+0s) / (3-2) = 30s

There are two issues here:

  1. Overestimation
    Excluding exits from the second half of the average time on page equation doesn’t have the desired effect when their time on page wasn’t 0 seconds—note that 30s is longer than any of the individual visits. This is why average time on page can often be longer than average visit duration. Nonetheless, 30 seconds doesn’t seem too far out in the above scenario (the intuitive average is 20s), but in the real world many pages have much higher exit rates than the 67% in this example, and/or much less engagement with events on page.
  2. Ignored visits
    Considering only visitors who exit without an engagement hit, whether these visitors stayed for 2 seconds, 10 minutes or anything inbetween, it doesn’t influence average time on page in the slightest. On many sites, a 10 minute view of a single page without interaction (e.g. a blog post) would be considered a success, but it wouldn’t influence this metric.

Solution: Unfortunately, there isn’t an easy solution to this issue. If you want to use average time on page, you just need to keep in mind how it’s calculated. You could also consider setting up more engagement events on page (like a scroll event without the “nonInteraction” parameter)—this solves issue #2 above, but potentially worsens issue #1.

Site Speed

If you’ve used the Site Speed reports in Google Analytics in the past, you’ve probably noticed that the numbers can sometimes be pretty difficult to believe. This is because the way that Site Speed is tracked is extremely vulnerable to outliers—it starts with a 1% sample of your users and then takes a simple average for each metric. This means that a few extreme values (for example, the occasional user with a malware-infested computer or a questionable wifi connection) can create a very large swing in your data.

The use of an average as a metric is not in itself bad, but in an area so prone to outliers and working with such a small sample, it can lead to questionable results.

Fortunately, you can increase the sampling rate right up to 100% (or the cap of 10,000 hits per day). Depending on the size of your site, this may still only be useful for top-level data. For example, if your site gets 1,000,000 hits per day and you’re interested in the performance of a new page that’s receiving 100 hits per day, Google Analytics will throttle your sampling back to the 10,000 hits per day cap—1%. As such, you’ll only be looking at a sample of 1 hit per day for that page.

Solution: Turn up the sampling rate. If you receive more than 10,000 hits per day, keep the sampling rate in mind when digging into less visited pages. You could also consider external tools and testing, such as Pingdom or WebPagetest.

Conversion Rate (by channel)

Obviously, conversion rate is not in itself a bad metric, but it can be rather misleading in certain reports if you don’t realise that, by default, conversions are attributed using a last non-direct click attribution model.

From Google Analytics Help:

“…if a person clicks over your site from google.com, then returns as “direct” traffic to convert, Google Analytics will report 1 conversion for “google.com / organic” in All Traffic.”

This means that when you’re looking at conversion numbers in your acquisition reports, it’s quite possible that every single number is different to what you’d expect under last click—every channel other than direct has a total that includes some conversions that occurred during direct sessions, and direct itself has conversion numbers that don’t include some conversions that occurred during direct sessions.

Solution: This is just something to be aware of. If you do want to know your last-click numbers, there’s always the Multi-Channel Funnels and Attribution reports to help you out.

Exit Rate

Unlike some of the other metrics I’ve discussed here, the calculation behind exit rate is very intuitive—”for all pageviews to the page, Exit Rate is the percentage that were the last in the session.” The problem with exit rate is that it’s so often used as a negative metric: “Which pages had the highest exit rate? They’re the problem with our site!” Sometimes this might be true: Perhaps, for example, if those pages are in the middle of a checkout funnel.

Often, however, a user will exit a site when they’ve found what they want. This doesn’t just mean that a high exit rate is ok on informational pages like blog posts or about pages—it could also be true of product pages and other pages with a highly conversion-focused intent. Even on ecommerce sites, not every visitor has the intention of converting. They might be researching towards a later online purchase, or even planning to visit your physical store. This is particularly true if your site ranks well for long tail queries or is referenced elsewhere. In this case, an exit could be a sign that they found the information they wanted and are ready to purchase once they have the money, the need, the right device at hand or next time they’re passing by your shop.

Solution: When judging a page by its exit rate, think about the various possible user intents. It could be useful to take a segment of visitors who exited on a certain page (in the Advanced tab of the new segment menu), and investigate their journey in User Flow reports, or their landing page and acquisition data.

Discussion

If you know of any other similarly misunderstood metrics, you have any questions or you have something to add to my analysis, tweet me at @THCapper or leave a comment below.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

[ccw-atrib-link]