SearchCap: Local SEO, Link Building & Negative Keywords

Below is what happened in search today, as reported on Search Engine Land and from other places across the web.

The post SearchCap: Local SEO, Link Building & Negative Keywords appeared first on Search Engine Land.

Please visit Search Engine Land for the full article.

Reblogged 2 years ago from feeds.searchengineland.com

The Meta Referrer Tag: An Advancement for SEO and the Internet

Posted by Cyrus-Shepard

The movement to make the Internet more secure through HTTPS brings several useful advancements for webmasters. In addition to security improvements, HTTPS promises future technological advances and potential SEO benefits for marketers.

HTTPS in search results is rising. Recent MozCast data from Dr. Pete shows nearly 20% of first page Google results are now HTTPS.

Sadly, HTTPS also has its downsides.

Marketers run into their first challenge when they switch regular HTTP sites over to HTTPS. Technically challenging, the switch typically involves routing your site through a series of 301 redirects. Historically, these types of redirects are associated with a loss of link equity (thought to be around 15%) which can lead to a loss in rankings. This can offset any SEO advantage that Google claims switching.

Ross Hudgens perfectly summed it up in this tweet:

Many SEOs have anecdotally shared stories of HTTPS sites performing well in Google search results (and our soon-to-be-published Ranking Factors data seems to support this.) However, the short term effect of a large migration can be hard to take. When Moz recently switched to HTTPS to provide better security to our logged-in users, we saw an 8-9% dip in our organic search traffic.

Problem number two is the subject of this post. It involves the loss of referral data. Typically, when one site sends traffic to another, information is sent that identifies the originating site as the source of traffic. This invaluable data allows people to see where their traffic is coming from, and helps spread the flow of information across the web.

SEOs have long used referrer data for a number of beneficial purposes. Oftentimes, people will link back or check out the site sending traffic when they see the referrer in their analytics data. Spammers know this works, as evidenced by the recent increase in referrer spam:

This process stops when traffic flows from an HTTPS site to a non-secure HTTP site. In this case, no referrer data is sent. Webmasters can’t know where their traffic is coming from.

Here’s how referral data to my personal site looked when Moz switched to HTTPS. I lost all visibility into where my traffic came from.

Its (not provided) all over again!

Enter the meta referrer tag

While we can’t solve the ranking challenges imposed by switching a site to HTTPS, we can solve the loss of referral data, and it’s actually super-simple.

Almost completely unknown to most marketers, the relatively new meta referrer tag (it’s actually been around for a few years) was designed to help out in these situations.

Better yet, the tag allows you to control how your referrer information is passed.

The meta referrer tag works with most browsers to pass referrer information in a manner defined by the user. Traffic remains encrypted and all the benefits of using HTTPS remain in place, but now you can pass referrer data to all websites, even those that use HTTP.

How to use the meta referrer tag

What follows are extremely simplified instructions for using the meta referrer tag. For more in-depth understanding, we highly recommend referring to the W3C working draft of the spec.

The meta referrer tag is placed in the <head> section of your HTML, and references one of five states, which control how browsers send referrer information from your site. The five states are:

  1. None: Never pass referral data
    <meta name="referrer" content="none">
    
  2. None When Downgrade: Sends referrer information to secure HTTPS sites, but not insecure HTTP sites
    <meta name="referrer" content="none-when-downgrade">
    
  3. Origin Only: Sends the scheme, host, and port (basically, the subdomain) stripped of the full URL as a referrer, i.e. https://moz.com/example.html would simply send https://moz.com
    <meta name="referrer" content="origin">
    

  4. Origin When Cross-Origin: Sends the full URL as the referrer when the target has the same scheme, host, and port (i.e. subdomain) regardless if it’s HTTP or HTTPS, while sending origin-only referral information to external sites. (note: There is a typo in the official spec. Future versions should be “origin-when-cross-origin”)
    <meta name="referrer" content="origin-when-crossorigin">
    
  5. Unsafe URL: Always passes the URL string as a referrer. Note if you have any sensitive information contained in your URL, this isn’t the safest option. By default, URL fragments, username, and password are automatically stripped out.
    <meta name="referrer" content="unsafe-url">
    

The meta referrer tag in action

By clicking the link below, you can get a sense of how the meta referrer tag works.

Check Referrer

Boom!

We’ve set the meta referrer tag for Moz to “origin”, which means when we link out to another site, we pass our scheme, host, and port. The end result is you see http://moz.com as the referrer, stripped of the full URL path (/meta-referrer-tag).

My personal site typically receives several visits per day from Moz. Here’s what my analytics data looked like before and after we implemented the meta referrer tag.

For simplicity and security, most sites may want to implement the “origin” state, but there are drawbacks.

One negative side effect was that as soon as we implemented the meta referrer tag, our AdRoll analytics, which we use for retargeting, stopped working. It turns out that AdRoll uses our referrer information for analytics, but the meta referrer tag “origin” state meant that the only URL they ever saw reported was https://moz.com.

Conclusion

We love the meta referrer tag because it keeps information flowing on the Internet. It’s the way the web is supposed to work!

It helps marketers and webmasters see exactly where their traffic is coming from. It encourages engagement, communication, and even linking, which can lead to improvements in SEO.

Useful links:

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 3 years ago from tracking.feedpress.it

Your Daily SEO Fix: Week 3

Posted by Trevor-Klein

Welcome to the third installment of our short (< 2-minute) video tutorials that help you all get the most out of Moz’s tools. Each tutorial is designed to solve a use case that we regularly hear about from Moz community members—a need or problem for which you all could use a solution.

If you missed the previous roundups, you can find ’em here:

  • Week 1: Reclaim links using Open Site Explorer, build links using Fresh Web Explorer, and find the best time to tweet using Followerwonk.
  • Week 2: Analyze SERPs using new MozBar features, boost your rankings through on-page optimization, check your anchor text using Open Site Explorer, do keyword research with OSE and the keyword difficulty tool, and discover keyword opportunities in Moz Analytics.

Today, we’ve got a brand-new roundup of the most recent videos:

  • How to Compare Link Metrics in Open Site Explorer
  • How to Find Tweet Topics with Followerwonk
  • How to Create Custom Reports in Moz Analytics
  • How to Use Spam Score to Identify High-Risk Links
  • How to Get Link Building Opportunities Delivered to Your Inbox

Hope you enjoy them!

Fix 1: How to Compare Link Metrics in Open Site Explorer

Not all links are created equal. In this Daily SEO Fix, Chiaryn shows you how to use Open Site Explorer to analyze and compare link metrics for up to five URLs to see which are strongest.

.video-container {
position: relative;
padding-bottom: 56.25%;
padding-top: 30px; height: 0; overflow: hidden;
}
.video-container iframe,
.video-container object,
.video-container embed {
position: absolute;
top: 0;
left: 0;
width: 100%;
height: 100%;
}


Fix 2: How to Find Tweet Topics with Followerwonk

Understanding what works best for your competitors on Twitter is a great place to start when forming your own Twitter strategy. In this fix, Ellie explains how to identify strong-performing tweets from your competitors and how to use those tweets to shape your own voice and plan.


Fix 3: How to Create Custom Reports in Moz Analytics

In this Daily SEO Fix, Kevin shows you how to create a custom report in Moz Analytics and schedule it to be delivered to your inbox on a daily, weekly, or monthly basis.


Fix 4: How to Use Spam Score to Identify High-Risk Links

Almost every site has a few bad links pointing to it, but lots of highly risky links can have a negative impact on your search engine rankings. In this fix, Tori shows you how to use Moz’s Spam Score metric to identify spammy links.


Fix 5: How to Get Link Building Opportunities Delivered to Your Inbox

Building high-quality links is one of the most important aspects of SEO. In this Daily SEO Fix, Erin shows you how to use Moz Analytics to set up a weekly custom report that will notify you of pages on the web that mention your site but do not include a link, so you can use this info to build more links.


Looking for more?

We’ve got more videos in the previous two weeks’ round-ups!

Your Daily SEO Fix: Week 1

Your Daily SEO Fix: Week 2


Don’t have a Pro subscription? No problem. Everything we cover in these Daily SEO Fix videos is available with a free 30-day trial.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 3 years ago from tracking.feedpress.it

Misuses of 4 Google Analytics Metrics Debunked

Posted by Tom.Capper

In this post I’ll pull apart four of the most commonly used metrics in Google Analytics, how they are collected, and why they are so easily misinterpreted.

Average Time on Page

Average time on page should be a really useful metric, particularly if you’re interested in engagement with content that’s all on a single page. Unfortunately, this is actually its worst use case. To understand why, you need to understand how time on page is calculated in Google Analytics:

Time on Page: Total across all pageviews of time from pageview to last engagement hit on that page (where an engagement hit is any of: next pageview, interactive event, e-commerce transaction, e-commerce item hit, or social plugin). (Source)

If there is no subsequent engagement hit, or if there is a gap between the last engagement hit on a site and leaving the site, the assumption is that no further time was spent on the site. Below are some scenarios with an intuitive time on page of 20 seconds, and their Google Analytics time on page:

Scenario

Intuitive time on page

GA time on page

0s: Pageview
10s: Social plugin
20s: Click through to next page

20s

20s

0s: Pageview
10s: Social plugin
20s: Leave site

20s

10s

0s: Pageview
20s: Leave site

20s

0s

Google doesn’t want exits to influence the average time on page, because of scenarios like the third example above, where they have a time on page of 0 seconds (source). To avoid this, they use the following formula (remember that Time on Page is a total):

Average Time on Page: (Time on Page) / (Pageviews – Exits)

However, as the second example above shows, this assumption doesn’t always hold. The second example feeds into the top half of the average time on page faction, but not the bottom half:

Example 2 Average Time on Page: (20s+10s+0s) / (3-2) = 30s

There are two issues here:

  1. Overestimation
    Excluding exits from the second half of the average time on page equation doesn’t have the desired effect when their time on page wasn’t 0 seconds—note that 30s is longer than any of the individual visits. This is why average time on page can often be longer than average visit duration. Nonetheless, 30 seconds doesn’t seem too far out in the above scenario (the intuitive average is 20s), but in the real world many pages have much higher exit rates than the 67% in this example, and/or much less engagement with events on page.
  2. Ignored visits
    Considering only visitors who exit without an engagement hit, whether these visitors stayed for 2 seconds, 10 minutes or anything inbetween, it doesn’t influence average time on page in the slightest. On many sites, a 10 minute view of a single page without interaction (e.g. a blog post) would be considered a success, but it wouldn’t influence this metric.

Solution: Unfortunately, there isn’t an easy solution to this issue. If you want to use average time on page, you just need to keep in mind how it’s calculated. You could also consider setting up more engagement events on page (like a scroll event without the “nonInteraction” parameter)—this solves issue #2 above, but potentially worsens issue #1.

Site Speed

If you’ve used the Site Speed reports in Google Analytics in the past, you’ve probably noticed that the numbers can sometimes be pretty difficult to believe. This is because the way that Site Speed is tracked is extremely vulnerable to outliers—it starts with a 1% sample of your users and then takes a simple average for each metric. This means that a few extreme values (for example, the occasional user with a malware-infested computer or a questionable wifi connection) can create a very large swing in your data.

The use of an average as a metric is not in itself bad, but in an area so prone to outliers and working with such a small sample, it can lead to questionable results.

Fortunately, you can increase the sampling rate right up to 100% (or the cap of 10,000 hits per day). Depending on the size of your site, this may still only be useful for top-level data. For example, if your site gets 1,000,000 hits per day and you’re interested in the performance of a new page that’s receiving 100 hits per day, Google Analytics will throttle your sampling back to the 10,000 hits per day cap—1%. As such, you’ll only be looking at a sample of 1 hit per day for that page.

Solution: Turn up the sampling rate. If you receive more than 10,000 hits per day, keep the sampling rate in mind when digging into less visited pages. You could also consider external tools and testing, such as Pingdom or WebPagetest.

Conversion Rate (by channel)

Obviously, conversion rate is not in itself a bad metric, but it can be rather misleading in certain reports if you don’t realise that, by default, conversions are attributed using a last non-direct click attribution model.

From Google Analytics Help:

“…if a person clicks over your site from google.com, then returns as “direct” traffic to convert, Google Analytics will report 1 conversion for “google.com / organic” in All Traffic.”

This means that when you’re looking at conversion numbers in your acquisition reports, it’s quite possible that every single number is different to what you’d expect under last click—every channel other than direct has a total that includes some conversions that occurred during direct sessions, and direct itself has conversion numbers that don’t include some conversions that occurred during direct sessions.

Solution: This is just something to be aware of. If you do want to know your last-click numbers, there’s always the Multi-Channel Funnels and Attribution reports to help you out.

Exit Rate

Unlike some of the other metrics I’ve discussed here, the calculation behind exit rate is very intuitive—”for all pageviews to the page, Exit Rate is the percentage that were the last in the session.” The problem with exit rate is that it’s so often used as a negative metric: “Which pages had the highest exit rate? They’re the problem with our site!” Sometimes this might be true: Perhaps, for example, if those pages are in the middle of a checkout funnel.

Often, however, a user will exit a site when they’ve found what they want. This doesn’t just mean that a high exit rate is ok on informational pages like blog posts or about pages—it could also be true of product pages and other pages with a highly conversion-focused intent. Even on ecommerce sites, not every visitor has the intention of converting. They might be researching towards a later online purchase, or even planning to visit your physical store. This is particularly true if your site ranks well for long tail queries or is referenced elsewhere. In this case, an exit could be a sign that they found the information they wanted and are ready to purchase once they have the money, the need, the right device at hand or next time they’re passing by your shop.

Solution: When judging a page by its exit rate, think about the various possible user intents. It could be useful to take a segment of visitors who exited on a certain page (in the Advanced tab of the new segment menu), and investigate their journey in User Flow reports, or their landing page and acquisition data.

Discussion

If you know of any other similarly misunderstood metrics, you have any questions or you have something to add to my analysis, tweet me at @THCapper or leave a comment below.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 3 years ago from tracking.feedpress.it

The Nifty Guide to Local Content Strategy and Marketing

Posted by NiftyMarketing

This is my Grandma.

She helped raised me and I love her dearly. That chunky baby with the Gerber cheeks is
me. The scarlet letter “A” means nothing… I hope.

This is a rolled up newspaper. 

rolled up newspaper

When I was growing up, I was the king of mischief and had a hard time following parental guidelines. To ensure the lessons she wanted me to learn “sunk in” my grandma would give me a soft whack with a rolled up newspaper and would say,

“Mike, you like to learn the hard way.”

She was right. I have
spent my life and career learning things the hard way.

Local content has been no different. I started out my career creating duplicate local doorway pages using “find and replace” with city names. After getting whacked by the figurative newspaper a few times, I decided there had to be a better way. To save others from the struggles I experienced, I hope that the hard lessons I have learned about local content strategy and marketing help to save you fearing a rolled newspaper the same way I do.

Lesson one: Local content doesn’t just mean the written word

local content ecosystem

Content is everything around you. It all tells a story. If you don’t have a plan for how that story is being told, then you might not like how it turns out. In the local world, even your brick and mortar building is a piece of content. It speaks about your brand, your values, your appreciation of customers and employees, and can be used to attract organic visitors if it is positioned well and provides a good user experience. If you just try to make the front of a building look good, but don’t back up the inside inch by inch with the same quality, people will literally say, “Hey man, this place sucks… let’s bounce.”

I had this experience proved to me recently while conducting an interview at
Nifty for our law division. Our office is a beautifully designed brick, mustache, animal on the wall, leg lamp in the center of the room, piece of work you would expect for a creative company.

nifty offices idaho

Anywho, for our little town of Burley, Idaho it is a unique space, and helps to set apart our business in our community. But, the conference room has a fluorescent ballast light system that can buzz so loudly that you literally can’t carry on a proper conversation at times, and in the recent interviews I literally had to conduct them in the dark because it was so bad.

I’m cheap and slow to spend money, so I haven’t got it fixed yet. The problem is I have two more interviews this week and I am so embarrassed by the experience in that room, I am thinking of holding them offsite to ensure that we don’t product a bad content experience. What I need to do is just fix the light but I will end up spending weeks going back and forth with the landlord on whose responsibility it is.

Meanwhile, the content experience suffers. Like I said, I like to learn the hard way.

Start thinking about everything in the frame of content and you will find that you make better decisions and less costly mistakes.

Lesson two: Scalable does not mean fast and easy growth

In every sales conversation I have had about local content, the question of scalability comes up. Usually, people want two things:

  1. Extremely Fast Production 
  2. Extremely Low Cost

While these two things would be great for every project, I have come to find that there are rare cases where quality can be achieved if you are optimizing for fast production and low cost. A better way to look at scale is as follows:

The rate of growth in revenue/traffic is greater than the cost of continued content creation.

A good local content strategy at scale will create a model that looks like this:

scaling content graph

Lesson three: You need a continuous local content strategy

This is where the difference between local content marketing and content strategy kicks in. Creating a single piece of content that does well is fairly easy to achieve. Building a true scalable machine that continually puts out great local content and consistently tells your story is not. This is a graph I created outlining the process behind creating and maintaining a local content strategy:

local content strategy

This process is not a one-time thing. It is not a box to be checked off. It is a structure that should become the foundation of your marketing program and will need to be revisited, re-tweaked, and replicated over and over again.

1. Identify your local audience

Most of you reading this will already have a service or product and hopefully local customers. Do you have personas developed for attracting and retaining more of them? Here are some helpful tools available to give you an idea of how many people fit your personas in any given market.

Facebook Insights

Pretend for a minute that you live in the unique market of Utah and have a custom wedding dress line. You focus on selling modest wedding dresses. It is a definite niche product, but one that shows the idea of personas very well.

You have interviewed your customer base and found a few interests that your customer base share. Taking that information and putting it into Facebook insights will give you a plethora of data to help you build out your understanding of a local persona.

facebook insights data

We are able to see from the interests of our customers there are roughly 6k-7k current engaged woman in Utah who have similar interests to our customer base.

The location tab gives us a break down of the specific cities and, understandably, Salt Lake City has the highest percentage with Provo (home of BYU) in second place. You can also see pages this group would like, activity levels on Facebook, and household income with spending habits. If you wanted to find more potential locations for future growth you can open up the search to a region or country.

localized facebook insights data

From this data it’s apparent that Arizona would be a great expansion opportunity after Utah.

Neilson Prizm

Neilson offers a free and extremely useful tool for local persona research called Zip Code Lookup that allows you to identify pre-determined personas in a given market.

Here is a look at my hometown and the personas they have developed are dead on.

Neilson Prizm data

Each persona can be expanded to learn more about the traits, income level, and areas across the country with other high concentrations of the same persona group.

You can also use the segment explorer to get a better idea of pre-determined persona lists and can work backwards to determine the locations with the highest density of a given persona.

Google Keyword Planner Tool

The keyword tool is fantastic for local research. Using our same Facebook Insight data above we can match keyword search volume against the audience size to determine how active our persona is in product research and purchasing. In the case of engaged woman looking for dresses, it is a very active group with a potential of 20-30% actively searching online for a dress.

google keyword planner tool

2. Create goals and rules

I think the most important idea for creating the goals and rules around your local content is the following from the must read book Content Strategy for the Web.

You also need to ensure that everyone who will be working on things even remotely related to content has access to style and brand guides and, ultimately, understands the core purpose for what, why, and how everything is happening.

3. Audit and analyze your current local content

The point of this step is to determine how the current content you have stacks up against the goals and rules you established, and determine the value of current pages on your site. With tools like Siteliner (for finding duplicate content) and ScreamingFrog (identifying page titles, word count, error codes and many other things) you can grab a lot of information very fast. Beyond that, there are a few tools that deserve a more in-depth look.

BuzzSumo

With BuzzSumo you can see social data and incoming links behind important pages on your site. This can you a good idea which locations or areas are getting more promotion than others and identify what some of the causes could be.

Buzzsumo also can give you access to competitors’ information where you might find some new ideas. In the following example you can see that one of Airbnb.com’s most shared pages was a motiongraphic of its impact on Berlin.

Buzzsumo

urlProfiler

This is another great tool for scraping urls for large sites that can return about every type of measurement you could want. For sites with 1000s of pages, this tool could save hours of data gathering and can spit out a lovely formatted CSV document that will allow you to sort by things like word count, page authority, link numbers, social shares, or about anything else you could imagine.

url profiler

4. Develop local content marketing tactics

This is how most of you look when marketing tactics are brought up.

monkey

Let me remind you of something with a picture. 

rolled up newspaper

Do not start with tactics. Do the other things first. It will ensure your marketing tactics fall in line with a much bigger organizational movement and process. With the warning out of the way, here are a few tactics that could work for you.

Local landing page content

Our initial concept of local landing pages has stood the test of time. If you are scared to even think about local pages with the upcoming doorway page update then please read this analysis and don’t be too afraid. Here are local landing pages that are done right.

Marriott local content

Marriot’s Burley local page is great. They didn’t think about just ensuring they had 500 unique words. They have custom local imagery of the exterior/interior, detailed information about the area’s activities, and even their own review platform that showcases both positive and negative reviews with responses from local management.

If you can’t build your own platform handling reviews like that, might I recommend looking at Get Five Stars as a platform that could help you integrate reviews as part of your continuous content strategy.

Airbnb Neighborhood Guides

I not so secretly have a big crush on Airbnb’s approach to local. These neighborhood guides started it. They only have roughly 21 guides thus far and handle one at a time with Seoul being the most recent addition. The idea is simple, they looked at extremely hot markets for them and built out guides not just for the city, but down to a specific neighborhood.

air bnb neighborhood guides

Here is a look at Hell’s Kitchen in New York by imagery. They hire a local photographer to shoot the area, then they take some of their current popular listing data and reviews and integrate them into the page. This idea would have never flown if they only cared about creating content that could be fast and easy for every market they serve.

Reverse infographicing

Every decently sized city has had a plethora of infographics made about them. People spent the time curating information and coming up with the concept, but a majority just made the image and didn’t think about the crawlability or page title from an SEO standpoint.

Here is an example of an image search for Portland infographics.

image search results portland infographics

Take an infographic and repurpose it into crawlable content with a new twist or timely additions. Usually infographics share their data sources in the footer so you can easily find similar, new, or more information and create some seriously compelling data based content. You can even link to or share the infographic as part of it if you would like.

Become an Upworthy of local content

No one I know does this better than Movoto. Read the link for their own spin on how they did it and then look at these examples and share numbers from their local content.

60k shares in Boise by appealing to that hometown knowledge.

movoto boise content

65k shares in Salt Lake following the same formula.

movoto salt lake city content

It seems to work with video as well.

movoto video results

Think like a local directory

Directories understand where content should be housed. Not every local piece should be on the blog. Look at where Trip Advisor’s famous “Things to Do” page is listed. Right on the main city page.

trip advisor things to do in salt lake city

Or look at how many timely, fresh, quality pieces of content Yelp is showcasing from their main city page.

yelp main city page

The key point to understand is that local content isn’t just about being unique on a landing page. It is about BEING local and useful.

Ideas of things that are local:

  • Sports teams
  • Local celebrities or heroes 
  • Groups and events
  • Local pride points
  • Local pain points

Ideas of things that are useful:

  • Directions
  • Favorite local sports
  • Granular details only “locals” know

The other point to realize is that in looking at our definition of scale you don’t need to take shortcuts that un-localize the experience for users. Figure and test a location at a time until you have a winning formula and then move forward at a speed that ensures a quality local experience.

5. Create a content calendar

I am not going to get into telling you exactly how or what your content calendar needs to include. That will largely be based on the size and organization of your team and every situation might call for a unique approach. What I will do is explain how we do things at Nifty.

  1. We follow the steps above.
  2. We schedule the big projects and timelines first. These could be months out or weeks out. 
  3. We determine the weekly deliverables, checkpoints, and publish times.
  4. We put all of the information as tasks assigned to individuals or teams in Asana.

asana content calendar

The information then can be viewed by individual, team, groups of team, due dates, or any other way you would wish to sort. Repeatable tasks can be scheduled and we can run our entire operation visible to as many people as need access to the information through desktop or mobile devices. That is what works for us.

6. Launch and promote content

My personal favorite way to promote local content (other than the obvious ideas of sharing with your current followers or outreaching to local influencers) is to use Facebook ads to target the specific local personas you are trying to reach. Here is an example:

I just wrapped up playing Harold Hill in our communities production of The Music Man. When you live in a small town like Burley, Idaho you get the opportunity to play a lead role without having too much talent or a glee-based upbringing. You also get the opportunity to do all of the advertising, set design, and costuming yourself and sometime even get to pay for it.

For my advertising responsibilities, I decided to write a few blog posts and drive traffic to them. As any good Harold Hill would do, I used fear tactics.

music man blog post

I then created Facebook ads that had the following stats: Costs of $.06 per click, 12.7% click through rate, and naturally organic sharing that led to thousands of visits in a small Idaho farming community where people still think a phone book is the only way to find local businesses.

facebook ads setup

Then we did it again.

There was a protestor in Burley for over a year that parked a red pickup with signs saying things like, “I wud not trust Da Mayor” or “Don’t Bank wid Zions”. Basically, you weren’t working hard enough if you name didn’t get on the truck during the year.

Everyone knew that ol’ red pickup as it was parked on the corner of Main and Overland, which is one of the few stoplights in town. Then one day it was gone. We came up with the idea to bring the red truck back, put signs on it that said, “I wud Not Trust Pool Tables” and “Resist Sins n’ Corruption” and other things that were part of The Music Man and wrote another blog complete with pictures.

facebook ads red truck

Then I created another Facebook Ad.

facebook ads set up

A little under $200 in ad spend resulted in thousands more visits to the site which promoted the play and sold tickets to a generation that might not have been very familiar with the show otherwise.

All of it was local targeting and there was no other way would could have driven that much traffic in a community like Burley without paying Facebook and trying to create click bait ads in hope the promotion led to an organic sharing.

7. Measure and report

This is another very personal step where everyone will have different needs. At Nifty we put together very custom weekly or monthly reports that cover all of the plan, execution, and relevant stats such as traffic to specific content or location, share data, revenue or lead data if available, analysis of what worked and what didn’t, and the plan for the following period.

There is no exact data that needs to be shared. Everyone will want something slightly different, which is why we moved away from automated reporting years ago (when we moved away from auto link building… hehe) and built our report around our clients even if it took added time.

I always said that the product of a SEO or content shop is the report. That is what people buy because it is likely that is all they will see or understand.

8. In conclusion, you must refine and repeat the process

local content strategy - refine and repeat

From my point of view, this is by far the most important step and sums everything up nicely. This process model isn’t perfect. There will be things that are missed, things that need tweaked, and ways that you will be able to improve on your local content strategy and marketing all the time. The idea of the cycle is that it is never done. It never sleeps. It never quits. It never surrenders. You just keep perfecting the process until you reach the point that few locally-focused companies ever achieve… where your local content reaches and grows your target audience every time you click the publish button.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don’t have time to hunt down but want to read!

Reblogged 3 years ago from tracking.feedpress.it